*INSTANCE

Begin an instance definition.

This option is used to instance a part within an assembly. It must be used in conjunction with the ASSEMBLY and END INSTANCE options. If the instance is not imported from a previous analysis, the INSTANCE option must be used in conjunction with the PART option.

When importing a part instance from a previous analysis, the INSTANCE option must be used in conjunction with the IMPORT option. In an Abaqus/Explicit import analysis, you can define a new position for an imported instance and import an instance more than once.

Related Topics
*END INSTANCE
*IMPORT
In Other Guides
Assembly definition
About transferring results between Abaqus analyses

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelAssembly

Abaqus/CAEAssembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis

Required parameters if the instance is not imported from a previous analysis

NAME

Set this parameter equal to a label that will be used to refer to the instance.

PART

Set this parameter equal to the name of the part being instanced.

Required parameter if the instance is to be imported once from a previous analysis

INSTANCE

Set this parameter equal to the name of the instance to be imported from the previous analysis.

Required parameters if the instance is to be imported more than once from a previous analysis (Abaqus/Explicit only)

NAME

Set this parameter equal to a new label that will be used to refer to the instance.

INSTANCE

Set this parameter equal to the old name of the instance to be imported from the previous analysis.

Required parameter if importing instances from multiple previous analyses (Abaqus/Explicit only); optional parameter if importing instances from a single previous analysis

LIBRARY

Set this parameter equal to the name of the previous analysis from which the instance should be imported. All input files and result files from the previous analyses must reside in the current (working) directory.

When importing from a single previous analysis, if the LIBRARY parameter is omitted, the job name of the previous analysis must be specified on the command line using the oldjob option (see Abaqus/Standard and Abaqus/Explicit execution). If both methods are used, the command line specification takes precedence over the LIBRARY parameter.

When importing from multiple previous analyses, set this parameter equal to the job name. You should not use the oldjob option on the command line.

Data line to translate an instance

First (and only) line

  1. Value of the translation to be applied in the X-direction.

  2. Value of the translation to be applied in the Y-direction.

  3. Value of the translation to be applied in the Z-direction.

Data lines to translate and/or rotate an instance

First line

  1. Value of the translation to be applied in the X-direction.

  2. Value of the translation to be applied in the Y-direction.

  3. Value of the translation to be applied in the Z-direction.

Enter values of zero to apply a pure rotation.

Second line

  1. X-coordinate of point a on the axis of rotation (see Figure 1).

  2. Y-coordinate of point a on the axis of rotation.

  3. Z-coordinate of point a on the axis of rotation.

  4. X-coordinate of point b on the axis of rotation.

  5. Y-coordinate of point b on the axis of rotation.

  6. Z-coordinate of point b on the axis of rotation.

  7. Angle of rotation about the axis a–b, in degrees.

If both translation and rotation are specified, translation is applied before rotation.

Figure 1. Rotation of an instance.