DamageInitiation object

The DamageInitiation object specifies material properties to define the initiation of damage.

The following topics are discussed:

Access

import material
mdb.models[name].materials[name].ductileDamageInitiation
mdb.models[name].materials[name].fldDamageInitiation
mdb.models[name].materials[name].flsdDamageInitiation
mdb.models[name].materials[name].hashinDamageInitiation
mdb.models[name].materials[name].johnsonCookDamageInitiation
mdb.models[name].materials[name].maxeDamageInitiation
mdb.models[name].materials[name].maxpeDamageInitiation
mdb.models[name].materials[name].maxpsDamageInitiation
mdb.models[name].materials[name].maxsDamageInitiation
mdb.models[name].materials[name].mkDamageInitiation
mdb.models[name].materials[name].msfldDamageInitiation
mdb.models[name].materials[name].quadeDamageInitiation
mdb.models[name].materials[name].quadsDamageInitiation
mdb.models[name].materials[name].shearDamageInitiation
import odbMaterial
session.odbs[name].materials[name].ductileDamageInitiation
session.odbs[name].materials[name].fldDamageInitiation
session.odbs[name].materials[name].flsdDamageInitiation
session.odbs[name].materials[name].hashinDamageInitiation
session.odbs[name].materials[name].johnsonCookDamageInitiation
session.odbs[name].materials[name].maxeDamageInitiation
session.odbs[name].materials[name].maxpeDamageInitiation
session.odbs[name].materials[name].maxpsDamageInitiation
session.odbs[name].materials[name].maxsDamageInitiation
session.odbs[name].materials[name].mkDamageInitiation
session.odbs[name].materials[name].msfldDamageInitiation
session.odbs[name].materials[name].quadeDamageInitiation
session.odbs[name].materials[name].quadsDamageInitiation
session.odbs[name].materials[name].shearDamageInitiation

DuctileDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].DuctileDamageInitiation
session.odbs[name].materials[name].DuctileDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Table data

If constructor is DuctileDamageInitiation, the table data specify the following:

  • Equivalent fracture strain at damage initiation.

  • Stress triaxiality.

  • Strain rate.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is FldDamageInitiation, the table data specify the following:

  • Major principal strain at damage initiation.

  • Minor principal strain.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor FlsdDamageInitiation, the table data specify the following:

  • Major principal stress at damage initiation.

  • Minor principal stress.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is JohnsonCookDamageInitiation, the table data specify the following:

  • Johnson-Cook failure parameter D1.

  • Johnson-Cook failure parameter D2.

  • Johnson-Cook failure parameter D3.

  • Johnson-Cook failure parameter D4.

  • Johnson-Cook failure parameter D5.

  • Melting temperature.

  • Transition temperature.

  • Reference strain rate.

If constructor MkDamageInitiation, the table data specify the following:

  • Flaw size relative to nominal thickness of the section.

  • Angle (in degrees) with respect to the 1-direction of the local material orientation.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is MsfldDamageInitiation and definition=MSFLD, the table data specify the following:

  • Nominal strain at damage initiation in a normal-only mode.

  • Equivalent plastic strain at initiation of localized necking.

  • Ratio of minor to major principal strains.

  • Equivalent plastic strain rate.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is MsfldDamageInitiation and definition=FLD, the table data specify the following:

  • Major principal strain at initiation of localized necking.

  • Equivalent plastic strain at initiation of localized necking.

  • Ratio of minor to major principal strains.

  • Equivalent plastic strain rate.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is QuadeDamageInitiation or MaxeDamageInitiation, the table data specify the following:

  • Nominal strain at damage initiation in a normal-only mode.

  • Nominal strain at damage initiation in a shear-only mode that involves separation only along the first shear direction.

  • Nominal strain at damage initiation in a shear-only mode that involves separation only along the second shear direction.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is QuadsDamageInitiation or MaxsDamageInitiation, the table data specify the following:

  • Nominal strain at damage initiation in a normal-only mode.

  • Nominal strain at damage initiation in a shear-only mode that involves separation only along the first shear direction.

  • Nominal strain at damage initiation in a shear-only mode that involves separation only along the second shear direction.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is MaxpeDamageInitiation, the table data specify the following:

  • Maximum principal strain at damage initiation.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is MaxpsDamageInitiation, the table data specify the following:

  • Maximum principal stress at damage initiation.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is ShearDamageInitiation, the table data specify the following:

  • Equivalent fracture strain at damage initiation.

  • Shear stress ratio.

  • Strain rate.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

If constructor is HashinDamageInitiation, the table data specify the following:

  • Fiber tensile strength.

  • Fiber compressive strength.

  • Matrix tensile strength.

  • Matrix compressive strength.

  • Longitudinal shear strength.

  • Transverse shear strength.

  • Temperature, if the data depend on temperature.

  • Value of the first field variable, if the data depend on field variables.

  • Value of the second field variable.

  • Etc.

Return value

A DamageInitiation object.

Exceptions

RangeError.

FldDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].FldDamageInitiation
session.odbs[name].materials[name].FldDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

FlsdDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].FlsdDamageInitiation
session.odbs[name].materials[name].FlsdDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

JohnsonCookDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].JohnsonCookDamageInitiation
session.odbs[name].materials[name].JohnsonCookDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

MaxeDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].MaxeDamageInitiation
session.odbs[name].materials[name].MaxeDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

position

An SymbolicConstant specifying the damage initiation position. Possible values are CENTROID, CRACKTIP and COMBINED. The default value is CENTROID.

Return value

A DamageInitiation object.

Exceptions

RangeError.

MaxsDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].MaxsDamageInitiation
session.odbs[name].materials[name].MaxsDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

position

An SymbolicConstant specifying the damage initiation position. Possible values are CENTROID, CRACKTIP and COMBINED. The default value is CENTROID.

Return value

A DamageInitiation object.

Exceptions

RangeError.

MkDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].MkDamageInitiation
session.odbs[name].materials[name].MkDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

MsfldDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].MsfldDamageInitiation
session.odbs[name].materials[name].MsfldDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

QuadeDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].QuadeDamageInitiation
session.odbs[name].materials[name].QuadeDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

position

An SymbolicConstant specifying the damage initiation position. Possible values are CENTROID, CRACKTIP and COMBINED. The default value is CENTROID.

Return value

A DamageInitiation object.

Exceptions

RangeError.

QuadsDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].QuadsDamageInitiation
session.odbs[name].materials[name].QuadsDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

position

An SymbolicConstant specifying the damage initiation position. Possible values are CENTROID, CRACKTIP and COMBINED. The default value is CENTROID.

Return value

A DamageInitiation object.

Exceptions

RangeError.

MaxpeDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].MaxpeDamageInitiation
session.odbs[name].materials[name].MaxpeDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

position

An SymbolicConstant specifying the damage initiation position. Possible values are CENTROID, CRACKTIP and COMBINED. The default value is CENTROID.

Return value

A DamageInitiation object.

Exceptions

RangeError.

MaxpsDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].MaxpsDamageInitiation
session.odbs[name].materials[name].MaxpsDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

position

An SymbolicConstant specifying the damage initiation position. Possible values are CENTROID, CRACKTIP and COMBINED. The default value is CENTROID.

Return value

A DamageInitiation object.

Exceptions

RangeError.

ShearDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].ShearDamageInitiation
session.odbs[name].materials[name].ShearDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

HashinDamageInitiation(...)

This method creates a DamageInitiation object.

Path

mdb.models[name].materials[name].HashinDamageInitiation
session.odbs[name].materials[name].HashinDamageInitiation

Required arguments

table

A sequence of sequences of Floats specifying the items described in the "Table data" section.

Optional arguments

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

Return value

A DamageInitiation object.

Exceptions

RangeError.

setValues(...)

This method modifies the DamageInitiation object.

Required arguments

None.

Optional arguments

The optional arguments to setValues are the same as the arguments to the DamageInitiation method.

Return value

None.

Exceptions

None.

Members

The DamageInitiation object can have the following members:

definition

A SymbolicConstant specifying the damage initiation definition. Possible values are FLD and MSFLD. The default value is MSFLD.

feq

A Float specifying the critical value of the deformation severity index for equivalent plastic strains. The default value is 10.0.

fnn

A Float specifying the critical value of the deformation severity index for strains normal to the groove direction. The default value is 10.0.

fnt

A Float specifying the critical value of the deformation severity index for shear strains. The default value is 10.0.

frequency

An Int specifying the frequency, in increments, at which the Marciniak-Kuczynski analysis is going to be performed. The default value is 1.

ks

A Float specifying the value of Ks. The default value is 0.0.

numberImperfections

An Int specifying the number of imperfections to be considered for the evaluation of the Marciniak-Kuczynski analysis. These imperfections are assumed to be equally spaced in the angular direction. The default value is 4.

temperatureDependency

A Boolean specifying whether the data depend on temperature. The default value is OFF.

dependencies

An Int specifying the number of field variable dependencies. The default value is 0.

alpha

A Float specifying the value of the coefficient that will multiply the shear contribution to the Hashin's fiber initiation criterion. The default value is 0.0.

omega

A Float specifying the factor used for filtering the ratio of principal strain rates used for the evaluation of the MSFLD damage initiation criterion. The default value is 1.0.

tolerance

A Float specifying the tolerance within which the damage initiation criterion must be satisfied. The default value is 0.05.

direction

A SymbolicConstant specifying the damage initiation direction. Possible values are NMORI and TMORI. The default value is NMORI.

table

A tuple of tuples of Floats specifying the items described in the "Table data" section.

damageEvolution

A DamageEvolution object.

damageStabilization

A DamageStabilization object.

damageStabilizationCohesive

A DamageStabilizationCohesive object.

Corresponding analysis keywords