Control object

The Control object is used to provide additional optional general solution controls.

The following topics are discussed:

Access

import step
mdb.models[name].steps[name].control

setValues(...)

This method modifies the Control object.

Required arguments

None.

Optional arguments

allowPropagation

A Boolean specifying whether to allow all control values to propagate from a previous step. Setting this argument to ON automatically sets resetDefaultValues to OFF. The default value is ON.

resetDefaultValues

A Boolean specifying whether to use all default control values. Setting this argument to ON automatically sets allowPropagation to OFF. The default value is OFF.

discontinuous

A Boolean specifying whether to set timeIncrementation values that will usually improve efficiency for analyses with severely discontinuous behavior. The default value is OFF.

constraints

The SymbolicConstant DEFAULT or a sequence of Floats specifying tolerances on constraint equations. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

lineSearch

The SymbolicConstant DEFAULT or a sequence of Floats specifying line search control parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

timeIncrementation

The SymbolicConstant DEFAULT or a sequence of Floats specifying time incrementation control parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

directCyclic

The SymbolicConstant DEFAULT or a sequence of Floats specifying direct cyclic control parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

concentrationField

The SymbolicConstant DEFAULT or a sequence of Floats specifying mass concentration field equilibrium equation parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

displacementField

The SymbolicConstant DEFAULT or a sequence of Floats specifying displacement field and warping degree of freedom field equilibrium equation parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

electricalPotentialField

The SymbolicConstant DEFAULT or a sequence of Floats specifying electrical potential field equilibrium equation parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

globalField

The SymbolicConstant DEFAULT or a sequence of Floats specifying parameters for all applicable field equilibrium equations. This argument overwrites all other field equilibrium equation control values. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

hydrostaticFluidPressureField

The SymbolicConstant DEFAULT or a sequence of Floats specifying hydrostatic fluid element volume constraint parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

poreFluidPressureField

The SymbolicConstant DEFAULT or a sequence of Floats specifying pore liquid volumetric continuity equilibrium equation parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

rotationField

The SymbolicConstant DEFAULT or a sequence of Floats specifying rotation field equilibrium equation parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

temperatureField

The SymbolicConstant DEFAULT or a sequence of Floats specifying temperature field equilibrium equation parameters. If a specified sequence contains a value of 0, that item in the sequence will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

vcctLinearScaling

The SymbolicConstant DEFAULT or a Float specifying linear scaling parameter for a VCCT debonding analysis. If a specified value is 0, it will be set to its system-defined value. The value can also be the SymbolicConstant DEFAULT. The default value is DEFAULT.

Return value

None.

Exceptions

RangeError.

Members

The Control object has members with the same names and descriptions as the arguments to the setValues method.