CompositeShellSection object | ||
| ||
Access
import section mdb.models[name].parts[name].compositeLayups[i].section mdb.models[name].sections[name] import odbSection session.odbs[name].sections[name]
CompositeShellSection(...)
This method creates a CompositeShellSection object.
Path
mdb.models[name].parts[name].compositeLayups[i].CompositeShellSection mdb.models[name].CompositeShellSection session.odbs[name].CompositeShellSection
Required arguments
- name
A String specifying the repository key.
- layup
A SectionLayerArray object specifying the shell cross-section.
Optional arguments
- symmetric
A Boolean specifying whether or not the layup should be made symmetric by the analysis. The default value is OFF.
- thicknessType
A SymbolicConstant specifying the distribution used for defining the thickness of the elements. Possible values are UNIFORM, ANALYTICAL_FIELD, DISCRETE_FIELD, NODAL_ANALYTICAL_FIELD, and NODAL_DISCRETE_FIELD. The default value is UNIFORM.
- preIntegrate
A Boolean specifying whether the shell section properties are specified by the user prior to the analysis (ON) or integrated during the analysis (OFF). The default value is OFF.
- poissonDefinition
A SymbolicConstant specifying whether to use the default value for the Poisson's ratio. Possible values are:
DEFAULT, specifying that the default value for the Poisson's ratio is 0.5 in an Abaqus/Standard analysis and is obtained from the material definition in an Abaqus/Explicit analysis.
VALUE, specifying that the Poisson's ratio used in the analysis is the value provided in poisson.
The default value is DEFAULT.
- poisson
A Float specifying the Poisson's ratio. Possible values are −1.0 poisson 0.5. This argument is valid only when poissonDefinition=VALUE. The default value is 0.5.
- integrationRule
A SymbolicConstant specifying the shell section integration rule. Possible values are SIMPSON and GAUSS. The default value is SIMPSON.
- temperature
A SymbolicConstant specifying the mode used for temperature and field variable input across the section thickness. Possible values are GRADIENT and POINTWISE. The default value is GRADIENT.
- idealization
A SymbolicConstant specifying the mechanical idealization used for the section calculations. This member is only applicable when preIntegrate is set to ON. Possible values are NO_IDEALIZATION, SMEAR_ALL_LAYERS, MEMBRANE, and BENDING. The default value is NO_IDEALIZATION.
- nTemp
None or an Int specifying the number of temperature points to be input. This argument is valid only when temperature=POINTWISE. The default value is None.
- thicknessModulus
None or a Float specifying the effective thickness modulus. This argument is relevant only for continuum shells and must be used in conjunction with the argument poisson. The default value is None.
- useDensity
A Boolean specifying whether or not to use the value of density. The default value is OFF.
- density
A Float specifying the value of density to apply to this section. The default value is 0.0.
- layupName
A String specifying the layup name for this section. The default value is an empty string.
- thicknessField
A String specifying the name of the AnalyticalField or DiscreteField object used to define the thickness of the shell elements. The thicknessField argument applies only when thicknessType=ANALYTICAL_FIELD or thicknessType=DISCRETE_FIELD. The default value is an empty string.
- nodalThicknessField
A String specifying the name of the AnalyticalField or DiscreteField object used to define the thickness of the shell elements at each node. The nodalThicknessField argument applies only when thicknessType=NODAL_ANALYTICAL_FIELD or thicknessType=NODAL_DISCRETE_FIELD. The default value is an empty string.
Return value
A CompositeShellSection object.
Exceptions
None.
setValues(...)
This method modifies the CompositeShellSection object.
Required arguments
None.
Optional arguments
The optional arguments to setValues are the same as the arguments to the CompositeShellSection method, except for the name argument.
Return value
None.
Exceptions
None.
Members
The CompositeShellSection object has members with the same names and descriptions as the arguments to the CompositeShellSection method.
In addition, the CompositeShellSection object can have the following members:
- rebarLayers
A RebarLayers object specifying reinforcement properties.
- transverseShear
A TransverseShearShell object specifying the transverse shear stiffness properties.