CompositeLayup object | ||
| ||
Access
import part mdb.models[name].parts[name].compositeLayups[i]
CompositeLayup(...)
This method creates a CompositeLayup object.
Path
mdb.models[name].parts[name].CompositeLayup
Required arguments
- name
A String specifying the repository key.
Optional arguments
- description
A String specifying a description of the composite layup.
- offsetType
A SymbolicConstant specifying the method used to define the shell offset. If offsetType=OFFSET_FIELD the offsetField argument is required. This member is valid only if elementType=SHELL. Possible values are SINGLE_VALUE, MIDDLE_SURFACE, TOP_SURFACE, BOTTOM_SURFACE, OFFSET_FIELD, and GLOBAL. The default value is GLOBAL.
- offsetField
A String specifying The name of the field specifying the offset. This member is valid only if elementType=SHELL. The default value is an empty string.
- offsetValues
A Float specifying The offset of the shell section. This member is valid only if elementType=SHELL. The default value is 0.0.
- elementType
A SymbolicConstant specifying the type of element in the composite layup. Possible values are SHELL, CONTINUUM_SHELL, and SOLID. The default value is SHELL.
- symmetric
A Boolean specifying whether or not the layup should be made symmetric by the analysis. The default value is OFF.
Return value
A CompositeLayup object.
Exceptions
AbaqusException.
suppress()
This method suppresses a composite layup.
Arguments
None.
Return value
None.
Exceptions
None.
resume()
This method resumes a composite layup that was previously suppressed.
Arguments
None.
Return value
None.
Exceptions
None.
deletePlies()
This method deletes all of the plies from a composite layup.
Arguments
None.
Return value
None.
Exceptions
None.
setValues(...)
This method modifies the CompositeLayup object.
Required arguments
None.
Optional arguments
The optional arguments to setValues are the same as the arguments to the CompositeLayup method, except for the name argument.
Return value
None.
Exceptions
None.
Members
The CompositeLayup object has members with the same names and descriptions as the arguments to the CompositeLayup method.
In addition, the CompositeLayup object has the following members:
- section
A GeometryShellSection object.
- orientation
A MaterialOrientation object.
- plies
A CompositePlyArray object specifying the plies that make up this composite layup.