Selecting X–Y data objects

1. Locate the X–Y report XY Data options.

   From the main menu bar, select ReportXY; then click the XY Data tab in the dialog box that appears.

2. Select the X–Y data objects to include in your report from the list of available data objects. By default, all previously saved X–Y data objects are listed. Choose one of the following options to adjust the contents of this list:

   • Click All XY data to browse all previously saved X–Y data objects.

   • Click XY plot in current viewport to browse only those X–Y data objects included in the X–Y data plot in the current viewport.

   Abaqus/CAE lists the X–Y data objects you have requested.

3. To limit the list for easier selection, type a filter pattern into the Name filter field, and press the Enter key to apply the filter. Click to the right of the text field to display information about how to construct a filter.

   Abaqus/CAE lists only those X–Y data objects that meet your specification.

4. From the list of X–Y data object names and descriptions, select one or more data objects to include in your report. For more information on selecting multiple items in dialog boxes, see Selecting multiple items from lists and tables.

To generate your report, configure any desired customization options on the Setup page, which is also in the Report XY Data dialog box; and click Apply. When you have finished, click Cancel to close the dialog box.