Creating or editing a material

You use the Edit Material dialog box to create a new material or edit an existing material. When you select MaterialCreate from the main menu bar, you can enter the name of your choice for the material or accept the default name, you can provide a description for the material, and you can define the material properties. When you select MaterialEdit, you can redefine the material description or properties, but you must use MaterialRename to change the name of an existing material.

Related Topics
Understanding the Property module editors
Creating and editing materials

Context:

Use the menu bar under the Material Behaviors list to add properties to a material. Some of the menu items contain submenus; for example, the following figure shows the behaviors available under the MechanicalElasticity menu item:

Note:

To display information on a particular material behavior, click and hold that behavior and then press F1. A help window appears that contains information about the parameters and data associated with the behavior.

Use the Material Behaviors list to select an existing material behavior to edit.

Warning: Abaqus/CAE does not check for missing or invalid material behaviors until you submit the job for analysis. (Any warnings and errors are reported by the Job module.) Therefore, you must be careful to supply valid data for all of the material behaviors that the analysis requires.

  1. Display the material editor using one of the following methods:

    • From the main menu bar, select MaterialCreate.

      Tip: You can also click Create in the Material Manager or select the create material tool in the Property module toolbox.

    • From the main menu bar, select MaterialEditmaterial name.

      Tip: You can also select a material and click Edit in the Material Manager.

    An Edit Material dialog box appears.

  2. If you are creating a new material, enter the name of your choice for the material. For more information on naming objects, see Using basic dialog box components.

  3. If desired, enter a description for the material.

    1. Click in the Edit Material dialog box.

      The material description editor appears.

    2. In the material description editor, type information that you want to record about the material.
    3. Click OK to store the description and to close the material description editor.

    When you submit a job, Abaqus/CAE writes material descriptions to the input file using comment lines; the material descriptions are not written to the output database. For more information, see Adding descriptions to your Abaqus/CAE model.

  4. Use the menu bar or Material Behaviors list to select a new or existing material behavior, respectively.

    The behavior definition area in the dialog box changes to show all the parameters and data associated with the selected material behavior.

  5. Edit the parameters and data to complete the material definition.

  6. If you wish to remove a material behavior, select it and click to the right of the menu bar.

  7. When you have finished editing the material definition, click OK to save the material and to close the dialog box.