LINK_BEAD

ID_NAME	= <`id_name_of_link_bead`>	Name of `LINK_BEAD` definition.
CS	= `<name_of_coord_system>`	Name of the coordinate system in which the link condition is defined.
TYPE		Type of link condition
	= `PLANE_SYM, AXIS_1` = `PLANE_SYM, AXIS_2` = `PLANE_SYM, AXIS_3`	A symmetrical displacement of the nodes referring to the plane which lies normal to the given axis of the coordinate system.
	= `POINT_SYM`	A symmetrical displacement of the nodes referring to the origin of the coordinate system is enforced.
	= `ROTATIONAL_SYM, AXIS_1` = `ROTATIONAL_SYM, AXIS_2` = `ROTATIONAL_SYM, AXIS_3`	A rotational symmetric displacement of the nodes referring to the given axis of the coordinate system is enforced.

Remarks

Only Cartesian coordinate systems are allowed in the CS definition.
The possibility of creating MASTER and CLIENT groups canNOT be done in LINK_BEAD.
LINK_BEAD is also allowed for unsymmetrical meshes.
LINK_BEAD is only allowed for bead controller.

LINK_BEAD
 ID_NAME = my_link_01
 TYPE = PLANE_SYM, AXIS_3
 CS = cs_0
END_