*Heading
** Job name: cornerOnlySub Model name: Submodel
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*parameter
offset = 2.0
tolerance = offset
xpos = 5. - offset
ypos = -5. + offset
zpos = -offset
*Part, name=Part-1
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Part-1-1, part=Part-1
<xpos>,<ypos>,<zpos>
*Node
      1,         -10.,           5.,          20.
      2,          -5.,           5.,          20.
      3,          -5.,          10.,          20.
      4,         -10.,          10.,          20.
      5,          -5.,           5.,           0.
      6,          -5.,          10.,           0.
      7,         -10.,           5.,           0.
      8,         -7.5,           5.,          20.
      9,          -5.,          7.5,          20.
     10,         -7.5,          10.,          20.
     11,         -10.,          7.5,          20.
     12,          -5.,           5.,   17.1428566
     13,          -5.,           5.,   14.2857141
     14,          -5.,           5.,   11.4285717
     15,          -5.,           5.,    8.5714283
     16,          -5.,           5.,   5.71428585
     17,          -5.,           5.,   2.85714293
     18,          -5.,          7.5,           0.
     19,          -5.,          10.,   2.85714293
     20,          -5.,          10.,   5.71428585
     21,          -5.,          10.,    8.5714283
     22,          -5.,          10.,   11.4285717
     23,          -5.,          10.,   14.2857141
     24,          -5.,          10.,   17.1428566
     25,         -10.,           5.,   17.1428566
     26,         -10.,           5.,   14.2857141
     27,         -10.,           5.,   11.4285717
     28,         -10.,           5.,    8.5714283
     29,         -10.,           5.,   5.71428585
     30,         -10.,           5.,   2.85714293
     31,         -7.5,           5.,           0.
     32,         -7.5,          7.5,          20.
     33,          -5.,          7.5,   17.1428566
     34,          -5.,          7.5,   14.2857141
     35,          -5.,          7.5,   11.4285717
     36,          -5.,          7.5,    8.5714283
     37,          -5.,          7.5,   5.71428585
     38,          -5.,          7.5,   2.85714293
     39,         -7.5,           5.,   17.1428566
     40,         -7.5,           5.,   14.2857141
     41,         -7.5,           5.,   11.4285717
     42,         -7.5,           5.,    8.5714283
     43,         -7.5,           5.,   5.71428585
     44,         -7.5,           5.,   2.85714293
*Element, type=S4R
1,  1,  8, 32, 11
2,  8,  2,  9, 32
3, 11, 32, 10,  4
4, 32,  9,  3, 10
 5,  3,  9, 33, 24
 6,  9,  2, 12, 33
 7, 24, 33, 34, 23
 8, 33, 12, 13, 34
 9, 23, 34, 35, 22
10, 34, 13, 14, 35
11, 22, 35, 36, 21
12, 35, 14, 15, 36
13, 21, 36, 37, 20
14, 36, 15, 16, 37
15, 20, 37, 38, 19
16, 37, 16, 17, 38
17, 19, 38, 18,  6
18, 38, 17,  5, 18
19,  2,  8, 39, 12
20,  8,  1, 25, 39
21, 12, 39, 40, 13
22, 39, 25, 26, 40
23, 13, 40, 41, 14
24, 40, 26, 27, 41
25, 14, 41, 42, 15
26, 41, 27, 28, 42
27, 15, 42, 43, 16
28, 42, 28, 29, 43
29, 16, 43, 44, 17
30, 43, 29, 30, 44
31, 17, 44, 31,  5
32, 44, 30,  7, 31
*Nset, nset=_PickedSet2, internal
  1,  2,  3,  5,  6,  7,  8,  9, 12, 13, 14, 15, 16, 17, 18, 19
 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 33, 34, 35, 36
 37, 38, 39, 40, 41, 42, 43, 44
*Elset, elset=_PickedSet2, internal, generate
  5,  32,   1
*Nset, nset=_PickedSet5, internal
  1,  2,  3,  4,  8,  9, 10, 11, 32
*Elset, elset=_PickedSet5, internal, generate
 1,  4,  1
** Section: Section-1
*Shell Section, elset=_PickedSet5, material=Material-1
1., 5
** Section: Section-1
*Shell Section, elset=_PickedSet2, material=Material-1
1., 5
*End Instance
**  
*Nset, nset=_PickedSet10, internal, instance=Part-1-1, generate
  1,  44,   1
*Elset, elset=_PickedSet10, internal, instance=Part-1-1, generate
  1,  32,   1
*End Assembly
** 
** MATERIALS
** 
*Material, name=Material-1
*elastic
1.,0.3
*Conductivity
1.,
*Density
1.,
*Specific Heat
1.,
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, amplitude=RAMP
*static
1., 1.
*TEMPERATURE, FILE=xtcds4.odb, interpolate, exterior tolerance=<tolerance>
** 
** BOUNDARY CONDITIONS
** 
** Name: BC-1 Type: Submodel
*Boundary
_PickedSet10, 1,3
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=0
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field
*node output
NT,
*Output, history, frequency=0
*End Step