*HEADING
XTCPE6MS : CHECKING FOR MIDSIDE NODE TEMPERATURE INTERPOLATION [CPE6M]
***
*** Heat transfer run uses first-order elements (run xtdc2d3h.inp).
*** Second order (modified) elements are used in this input deck.
***
*RESTART, WRITE
*NODE,NSET=ALL
 1, 0.
 2, 7.
 3, 7., 7.
 4, 0., 7.
 5, 3.5, 0.0
 6, 7.0, 3.5
 7, 3.5, 7.0
 8, 0.0, 3.5
 9, 3.5, 3.5
*NSET,NSET=FIX1
1,8,4
*NSET,NSET=FIX2
1,4,5
*ELEMENT,TYPE=CPE6M, ELSET=EALL
 1, 1,2,3, 5,6,9
 2, 1,3,4, 9,7,8
*SOLID SECTION,MATERIAL=A1, ELSET=EALL
*MATERIAL,NAME=A1
*ELASTIC
1.0E06, 0.3
*EXPANSION
1.0E-05, 
*DENSITY
 82.9, 
*BOUNDARY
FIX1,1,1
FIX2, 2,2
*INITIAL CONDITIONS,TYPE=TEMPERATURE,MIDSIDE,FILE=xtdc2d3h,STEP=1,INC=0
**
*ELSET,ELSET=QA_TEST_ALLELEMS
EALL,
**
*NSET, NSET=QA_TEST_ALLNODES
ALL, FIX1, FIX2
**
*STEP
*DYNAMIC, EXPLICIT
,1.0
*TEMPERATURE, FILE=xtdc2d3h, MIDSIDE
*FILE OUTPUT,NUMBER INTERVAL=1
*EL FILE
 S,
 LE,
 TEMP,
*NODE FILE
 U,
*OUTPUT, FIELD, NUMBER=4
*NODE OUTPUT, NSET=ALL
U, 
*ELEMENT OUTPUT, ELSET=EALL
TEMP, 
S, 
LE
*OUTPUT, FIELD, NUMBER INTERVAL=1
*ELEMENT OUTPUT, ELSET=QA_TEST_ALLELEMS
 S,
 LE,
 TEMP,
*NODE OUTPUT, NSET=QA_TEST_ALLNODES
 U,
*OUTPUT,HISTORY,VARIABLE=PRESELECT,TIMEINT=1
***OUTPUT,HISTORY,VARIABLE=PRESELECT
*END STEP