*HEADING
: CHECKING FOR MIDSIDE NODE TEMPERATURE INTERPOLATION
***
*** Heat transfer run uses first-order elements
*** Second order elements are used in this input deck
***
*RESTART,WRITE
*NODE,NSET=NALL
  1, 0.0, 0.0, 0.0
  2, 7.0, 0.0, 0.0
  3, 7.0, 7.0, 0.0
  4, 0.0, 7.0, 0.0
  5, 0.0, 0.0, 7.0
  6, 7.0, 0.0, 7.0
  7, 7.0, 7.0, 7.0
  8, 0.0, 7.0, 7.0
**
 9, 3.5, 0.0, 0.0
10, 7.0, 3.5, 0.0
11, 3.5, 7.0, 0.0
12, 0.0, 3.5, 0.0
**
13, 3.5, 0.0, 7.0
14, 7.0, 3.5, 7.0
15, 3.5, 7.0, 7.0
16, 0.0, 3.5, 7.0
**
17, 0.0, 0.0, 3.5
18, 3.5, 0.0, 3.5
19, 7.0, 0.0, 3.5
20, 0.0, 3.5, 3.5
21, 3.5, 3.5, 3.5
22, 7.0, 3.5, 3.5
23, 0.0, 7.0, 3.5
24, 3.5, 7.0, 3.5
25, 7.0, 7.0, 3.5
**
26, 3.5, 3.5 ,7.0
27, 3.5, 3.5, 0.0
**
*ELEMENT,TYPE=C3D10,ELSET=ALL_ELEMENTS
 1, 1,2,3,6,  9,10,27, 18,19,22
 2, 1,5,6,8, 17,13,18, 20,16,26 
 3, 3,7,8,6, 25,15,24, 22,14,26
 4, 1,3,4,8, 27,11,12, 20,24,23
 5, 1,3,8,6, 27,24,20, 18,22,26
*SOLID SECTION,MATERIAL=A1, ELSET=ALL_ELEMENTS
*MATERIAL,NAME=A1
*ELASTIC
1.0E06, 0.3
*EXPANSION
1.0E-05, 
*NSET, NSET=FIX1
1,17,5
12,20,16
4,23,8
*NSET, NSET=FIX2
7,15,8
16,26,14
5,13,6
*BOUNDARY
FIX1,1,1
FIX2,2,2
*INITIAL CONDITIONS,TYPE=TEMPERATURE,MIDSIDE,FILE=xtdc3d4h,STEP=1,INC=0
*STEP
*STATIC
*TEMPERATURE, FILE=xtdc3d4h,MIDSIDE
*NODE PRINT
 NT, 
*EL PRINT,FREQ=1
TEMP, 
*EL FILE
THE, 
*NODE FILE
NT, 
*OUTPUT, FIELD
*NODE OUTPUT, NSET=NALL
NT,
*ELEMENT OUTPUT, ELSET=ALL_ELEMENTS
TEMP, 
*FILE FORMAT,ZERO INCREMENT
*END STEP