*HEADING
XTC3D10MS: CHECKING FOR MIDSIDE NODE TEMPERATURE INTERPOLATION [C3D10M]
***
*** Heat transfer run uses first-order elements (run xtdc3d4h.inp). 
*** Second order (modified) elements are used in this input deck.
***
*RESTART,WRITE
*NODE, NSET=NALL
  1, 0.0, 0.0, 0.0
  2, 7.0, 0.0, 0.0
  3, 7.0, 7.0, 0.0
  4, 0.0, 7.0, 0.0
  5, 0.0, 0.0, 7.0
  6, 7.0, 0.0, 7.0
  7, 7.0, 7.0, 7.0
  8, 0.0, 7.0, 7.0
**
 9, 3.5, 0.0, 0.0
10, 7.0, 3.5, 0.0
11, 3.5, 7.0, 0.0
12, 0.0, 3.5, 0.0
**
13, 3.5, 0.0, 7.0
14, 7.0, 3.5, 7.0
15, 3.5, 7.0, 7.0
16, 0.0, 3.5, 7.0
**
17, 0.0, 0.0, 3.5
18, 3.5, 0.0, 3.5
19, 7.0, 0.0, 3.5
20, 0.0, 3.5, 3.5
21, 3.5, 3.5, 3.5
22, 7.0, 3.5, 3.5
23, 0.0, 7.0, 3.5
24, 3.5, 7.0, 3.5
25, 7.0, 7.0, 3.5
**
26, 3.5, 3.5 ,7.0
27, 3.5, 3.5, 0.0
**
*ELEMENT,TYPE=C3D10M,ELSET=ALL_ELEMENTS
 1, 1,2,3,6,  9,10,27, 18,19,22
 2, 1,5,6,8, 17,13,18, 20,16,26 
 3, 3,7,8,6, 25,15,24, 22,14,26
 4, 1,3,4,8, 27,11,12, 20,24,23
 5, 1,3,8,6, 27,24,20, 18,22,26
*SOLID SECTION,MATERIAL=A1, ELSET=ALL_ELEMENTS
*MATERIAL,NAME=A1
*ELASTIC
1.0E06, 0.3
*EXPANSION
1.0E-05, 
*DENSITY
 82.9, 
*NSET, NSET=FIX1
1,17,5
12,20,16
4,23,8
*NSET, NSET=FIX2
7,15,8
16,26,14
5,13,6
*BOUNDARY
FIX1,1,1
FIX2,2,2
*INITIAL CONDITIONS,TYPE=TEMPERATURE,MIDSIDE,FILE=xtdc3d4h,STEP=1,INC=0
*INITIAL CONDITIONS,TYPE=FIELD,VARIABLE=1,OUTPUT VARIABLE=NT,INTERPOLATE,FILE=xtdc3d4h.odb,STEP=1,INC=0
*STEP
*DYNAMIC, EXPLICIT
, 1.00
*TEMPERATURE, FILE=xtdc3d4h,MIDSIDE
*FILE OUTPUT,NUMBER INTERVAL=1
*EL FILE
 S,
 TEMP,
*NODE FILE
 U
*OUTPUT, FIELD, NUMBER=4
*NODE OUTPUT, NSET=NALL
U, 
*ELEMENT OUTPUT, ELSET=ALL_ELEMENTS
TEMP
*output, history
*ELEMENT OUTPUT, ELSET=ALL_ELEMENTS
TEMP, FV1
*END STEP