*HEADING XTC3D10MS: CHECKING FOR MIDSIDE NODE TEMPERATURE INTERPOLATION [C3D10M] *** *** Heat transfer run uses first-order elements (run xtdc3d4h.inp). *** Second order (modified) elements are used in this input deck. *** *RESTART,WRITE *NODE, NSET=NALL 1, 0.0, 0.0, 0.0 2, 7.0, 0.0, 0.0 3, 7.0, 7.0, 0.0 4, 0.0, 7.0, 0.0 5, 0.0, 0.0, 7.0 6, 7.0, 0.0, 7.0 7, 7.0, 7.0, 7.0 8, 0.0, 7.0, 7.0 ** 9, 3.5, 0.0, 0.0 10, 7.0, 3.5, 0.0 11, 3.5, 7.0, 0.0 12, 0.0, 3.5, 0.0 ** 13, 3.5, 0.0, 7.0 14, 7.0, 3.5, 7.0 15, 3.5, 7.0, 7.0 16, 0.0, 3.5, 7.0 ** 17, 0.0, 0.0, 3.5 18, 3.5, 0.0, 3.5 19, 7.0, 0.0, 3.5 20, 0.0, 3.5, 3.5 21, 3.5, 3.5, 3.5 22, 7.0, 3.5, 3.5 23, 0.0, 7.0, 3.5 24, 3.5, 7.0, 3.5 25, 7.0, 7.0, 3.5 ** 26, 3.5, 3.5 ,7.0 27, 3.5, 3.5, 0.0 ** *ELEMENT,TYPE=C3D10M,ELSET=ALL_ELEMENTS 1, 1,2,3,6, 9,10,27, 18,19,22 2, 1,5,6,8, 17,13,18, 20,16,26 3, 3,7,8,6, 25,15,24, 22,14,26 4, 1,3,4,8, 27,11,12, 20,24,23 5, 1,3,8,6, 27,24,20, 18,22,26 *SOLID SECTION,MATERIAL=A1, ELSET=ALL_ELEMENTS *MATERIAL,NAME=A1 *ELASTIC 1.0E06, 0.3 *EXPANSION 1.0E-05, *DENSITY 82.9, *NSET, NSET=FIX1 1,17,5 12,20,16 4,23,8 *NSET, NSET=FIX2 7,15,8 16,26,14 5,13,6 *BOUNDARY FIX1,1,1 FIX2,2,2 *INITIAL CONDITIONS,TYPE=TEMPERATURE,INTERPOLATE,FILE=xtdc3d4h.odb,STEP=1,INC=0 *STEP *DYNAMIC, EXPLICIT , 1.00 *TEMPERATURE, FILE=xtdc3d4h.odb,INTERPOLATE *FILE OUTPUT,NUMBER INTERVAL=1 *EL FILE S, TEMP, *NODE FILE U *OUTPUT, FIELD, NUMBER=4 *NODE OUTPUT, NSET=NALL U, *ELEMENT OUTPUT, ELSET=ALL_ELEMENTS TEMP, *END STEP