*HEADING
 BASIC VERIFICATION - MPC TYPE BILINEAR with *TRANSFORM
 ELEMENT: C3D8, TEST TYPE:5 ,TEST NUMBER:6  --  
*NODE
1, 0., 0., 10.
5, 0., 20., 10.
6, 5., 0., 10.
10, 5., 20., 10.
11, 10., 0., 10.
14, 10., 15, 10.
99, 10., 20., 10.
15, 10., 0., 5.
19, 10., 20., 5.
20, 10., 0., 0.
24, 10., 20., 0.
25, 5., 0., 0.
29, 5., 20., 0.
30, 0., 0., 0.
34, 0., 20., 0.
35, 0., 0., 5.
39, 0., 20., 5.
40, 2.5, 10., 10.
41, 2.5, 10., 0.
42, 2.5, 20., 0.
43, 2.5, 20., 10.
44, 7.5, 10., 10.
45, 7.5, 10., 0.
46, 7.5, 20., 0.
47, 7.5, 20., 10.
50, 5., 10., 5.
51, 5., 20., 5.
*NGEN,NSET=LEFT
1,5,1
35,39,1
30,34,1
*NGEN
6,10,1
11,14,1
15,19,1
20, 24,1
25,29,1
*NSET,NSET=BOTTOM
1,6,11,15,20,25,30,35
*ELEMENT,TYPE=C3D8,ELSET=ELALL
1,1,11,20,30,3,13,22,32
2,3,8,50,37,5,10,51,39
3,8,13,17,50,10,99,19,51
4,50,17,22,27,51,19,24,29
5,37,50,27,32,39,51,29,34
*SOLID SECTION,ELSET=ELALL,MATERIAL=MAT
*MATERIAL,NAME=MAT
*ELASTIC
 3E6,.3
*NSET,NSET=BACK
30,25,20,31,26,21,32,27,22,45,28,23,34,42,29,46,
24,33,41
*NSET, NSET=CENTER
50, 
*NSET,NSET=INDP_N1
32,37
*NSET,NSET=INDP_N2
17, 
*NSET,NSET=MPC_N
27, 
*TRANSFORM,NSET=CENTER
** 30 ABOUT Y AXIS FOLLOWED BY 60 DEG. ABOUT (TRANSFORMED) X AXIS.
0.866025,0.0,-0.5,0.43301,0.5,0.75
*TRANSFORM,NSET=INDP_N1
0.7071,0.,-0.7071,0.0,1.,0.
*TRANSFORM,NSET=INDP_N2
** 45 ABOUT Y AXIS AND 45 ABOUT ABOUT (TRANSFORMED) Z AXIS
0.5,0.7071,-0.5,-0.5,0.7071,0.5
*TRANSFORM,NSET=MPC_N
** 45 ABOUT Y AXIS, THEN 36.869 ABOUT (TRANSFORMED) Z AXIS
0.56569,0.6,-0.56569,-0.424255,0.8,0.424255
*BOUNDARY
LEFT,1
BOTTOM,2
BACK,3
*MPC,MODE=DOF,INPUT=xmpcinfo.inp
*STEP,PERTURBATION
*STATIC
*DLOAD
2,P2,10000.
3,P2,10000.
4,P2,10000.
5,P2,10000.
*EL FILE,FREQ=99
 S, 
*NODE FILE,FREQ=99
 U, 
*EL PRINT,FREQ=99
 S, 
*NODE PRINT,FREQ=99, GLO=YES
 U, 
*END STEP
*STEP,NLGEOM
*STATIC
.5,1.
*DLOAD
2,P2,10000.
3,P2,10000.
4,P2,10000.
5,P2,10000.
*EL FILE,FREQ=99
 S,
*NODE FILE,FREQ=99
 U,
 COORD,
*EL PRINT,FREQ=99
 S,
*NODE PRINT,FREQ=99, GLO=YES
 U,
 COORD,
*END STEP