*Heading
** Job name: test_edge Model name: Model-1
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Part-1
*End Part
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Part-1-1, part=Part-1
*Node
      1,          -6.,           0.,           0.
      2,          -5.,           0.,           0.
      3,          -4.,           0.,           0.
      4,          -3.,           0.,           0.
      5,          -2.,           0.,           0.
      6,          -1.,           0.,           0.
      7,           0.,           0.,           0.
      8,           1.,           0.,           0.
      9,           2.,           0.,           0.
     10,           3.,           0.,           0.
     11,           4.,           0.,           0.
     12,           5.,           0.,           0.
     13,           6.,           0.,           0.
     14,          -6.,           1.,           0.
     15,          -5.,           1.,           0.
     16,          -4.,           1.,           0.
     17,          -3.,           1.,           0.
     18,          -2.,           1.,           0.
     19,          -1.,           1.,           0.
     20,           0.,           1.,           0.
     21,           1.,           1.,           0.
     22,           2.,           1.,           0.
     23,           3.,           1.,           0.
     24,           4.,           1.,           0.
     25,           5.,           1.,           0.
     26,           6.,           1.,           0.
*Element, type=S4
 1,  1,  2, 15, 14
 2,  2,  3, 16, 15
 3,  3,  4, 17, 16
 4,  4,  5, 18, 17
 5,  5,  6, 19, 18
 6,  6,  7, 20, 19
 7,  7,  8, 21, 20
 8,  8,  9, 22, 21
 9,  9, 10, 23, 22
10, 10, 11, 24, 23
11, 11, 12, 25, 24
12, 12, 13, 26, 25
** Region: (Section-1:Picked)
*Elset, elset=_PickedSet2, internal, generate
  1,  12,   1
** Section: Section-1
*Shell Section, elset=_PickedSet2, material=Material-1
0.5, 5
*End Instance
*Nset, nset=_PickedSet4, internal, instance=Part-1-1
  1, 14
*Elset, elset=_PickedSet4, internal, instance=Part-1-1
 1,
*Nset, nset=Set-1, instance=Part-1-1
 13, 26
*Elset, elset=Set-1, instance=Part-1-1
 12,
*Elset, elset=_Surf-1_E2, internal, instance=Part-1-1
 12,
*Surface, type=ELEMENT, name=Surf-1
_Surf-1_E2, E2
*End Assembly
** 
** MATERIALS
** 
*Material, name=Material-1
*Elastic
100., 0.3
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, nlgeom=YES, unsymm=YES
*Static
0.01, 0.1, 1e-06, 0.1
** 
** BOUNDARY CONDITIONS
** 
** Name: BC-1 Type: Displacement/Rotation
*Boundary
_PickedSet4, 1, 1
_PickedSet4, 2, 2
_PickedSet4, 3, 3
_PickedSet4, 4, 4
_PickedSet4, 5, 5
_PickedSet4, 6, 6
** 
** LOADS
** 
** Name: Load-1   Type: Pressure
*Dsload,follower=yes
Surf-1, edldnu, 1.0d-1,0,0,1
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=1
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field
*Node output
u,rf
*End Step