*HEADING Cylindrical elment testing under traction load (CCL12) *PREPRINT, ECHO=YES, MODEL=YES, HISTORY=YES ** ********************************************************** ** Parameter definition ** *PARAMETER INRAD=10.0 EXRAD=12.0 HEIGHT=1.0 ** MIDHEIGHT=HEIGHT/2 MID=(INRAD+EXRAD)/2 ** *********************************************************** ** Model definition ** *NODE, NSET=SECTION 1, ,0,0 2, ,0,0 3, ,0, 4, ,0, *NCOPY, CHANGE NUMBER=100, OLD SET=SECTION, NEW SET=REST, SHIFT, MULTIPLE=7 0,0,0 0,0,0,0,0,1,45 *NSET, NSET=ALL REST, SECTION *NSET, NSET=INT, GENERATE 1,701,100 4,704,100 *NSET, NSET=EX, GENERATE 2,702,100 3,703,100 *NSET, NSET=TOP, GENERATE 3,703,100 4,704,100 *NSET, NSET=BOTTOM, GENERATE 1,701,100 2,702,100 ** *ELEMENT, TYPE=CCL12, ELSET=FIRST 1, 201,202,203,204,1,2,3,4,101,102,103,104 *ELEMENT, TYPE=CCL12, ELSET=LAST 4, 1,2,3,4,601,602,603,604,701,702,703,704 *ELGEN, ELSET=FIRST3 1,3,200,1 *ELSET, ELSET=ALL FIRST3,LAST *SOLID SECTION, ELSET=ALL, MATERIAL=MYMAT *MATERIAL, NAME=MYMAT *ELASTIC 30E6,0.3 ************************************************************ *ORIENTATION, SYSTEM=CYLINDRICAL, NAME=CYL 0,0,0, 0,0,1 ** Boundary Condition *TRANSFORM, TYPE=C, NSET=ALL 0,0,0, 0,0,1 *BOUNDARY INT,1,3,0 ************************************************************ ** History data ** *STEP, NLGEOM=YES, UNSYMM=YES *STATIC 0.1,1.0 *DLOAD,ORIENTATION=CYL ALL,TRVEC4NU,5e6,1.,0.,0. *OUTPUT, FIELD *NODE OUTPUT, VARIABLE=PRESELECT *END STEP