**
** coupling surfaces
**
*surface,name=lower_arm_right_hole_front
lower_arm_right_hole_front,spos
*coupling,ref node=94464,surface=lower_arm_right_hole_front,constraint name=lower_arm_right_hole_front
*distributing
**
**
*surface,name=lower_arm_right_hole_back
lower_arm_right_hole_back,spos
*coupling,ref node=94461,surface=lower_arm_right_hole_back,constraint name=lower_arm_right_hole_back
*distributing
**
**
*surface,name=lower_arm_right_tip
lower_arm_right_tip,spos
*coupling,ref node=906347,surface=lower_arm_right_tip,constraint name=lower_arm_right_tip
*distributing
**
**
*nset,nset=lower_arm_right_strut
94080,
94078,
94076,
94074,
94071,
94063,
94062,
94061,
94060,
94058,
94057,
94056,
94055,
94054,
94053,
*surface, type=node,name=lower_arm_right_strut
lower_arm_right_strut,1.0
*coupling,ref node=971497,surface=lower_arm_right_strut,constraint name=lower_arm_right_strut
*distributing
**
**--------------------------------------------------------------
** add dummy mass/rotary inertia to coupling ref nodes
*ELEMENT, TYPE=MASS, ELSET=lower_arm_right_mass
803001,94464
803002,94461
803003,906347
803004,971497
*MASS, ELSET=lower_arm_right_mass
<small_mass>,
*ELEMENT, TYPE=ROTARYI, ELSET=lower_arm_right_rotary
803021,94464
803022,94461
803023,906347
803024,971497
*ROTARY INERTIA, ELSET=lower_arm_right_rotary
<small_rota>,<small_rota>,<small_rota>
**--------------------------------------------------------------
*nset,nset=retained_lower_arm_right,unsorted
94464,
94461,
906347,
971497,
94096,
*nset,nset=retained_all
retained_lower_arm_right,
**