*HEADING
TEMPERATURE DEPENDENT FILM CONDITION, EXPLICIT [CPE4RT]
**
** See ch. 1.3.37 of ABAQUS/Verification Manual
**
*RESTART,WRITE, NUM=10
*NODE
1, 0.0,  0.0
11,0.0,  0.1
12,0.01, 0.0
22,0.01, 0.1
*NGEN,NSET=NALL
1,11
12,22
*ELEMENT,TYPE=CPE4RT
1, 1,12,13,2
*ELGEN,ELSET=EALL
1, 10, 1
*SOLID SECTION,ELSET=EALL,MATERIAL=MAT
*MATERIAL,NAME=MAT
*ELASTIC
1.0,0.0
*EXPANSION
0.0,
*CONDUCTIVITY
1.40, 
*SPECIFIC HEAT
260.0, 
*DENSITY
7800.0, 
*FILM PROPERTY,NAME=FILMP
10.0,  0.0
16.0,300.0
*AMPLITUDE,NAME=SINK
0.0,100.0, 3600.0,200.0
*INITIAL CONDITIONS,TYPE=TEMPERATURE
NALL,0.0
*STEP
*DYNAMIC TEMPERATURE-DISPLACEMENT, EXPLICIT
,3600.
*FILM,AMP=SINK
10,F3,1.0,FILMP
*DFLUX
EALL,S2,0.0
EALL,S4,0.0
1,S1,0.0
****************************
*FILE OUTPUT, NUM=1
*NODE FILE, NSET=NALL
NT, 
****************************
*OUTPUT,FIELD,NUM=1
*NODE OUTPUT,NSET=NALL
NT, 
****************************
***OUTPUT,HISTORY,TIME INTERVAL=360
***NODE OUTPUT,NSET=NALL
**NT, 
****
*OUTPUT,HISTORY,TIME INTERVAL=3600
*ENERGY OUTPUT,VAR=ALL
****************************
*END STEP