*HEADING
 Transfer from Standard to Standard: elastic+plastic
 - First Standard analysis
*preprint,model=yes
*RESTART,WRITE
*NODE,NSET=ALL
1,0.0,0.0,0.0
2,1.0,0.0,0.0
3,1.0,1.0,0.0
4,0.0,1.0,0.0
5,0.0,0.0,1.0
6,1.0,0.0,1.0
7,1.0,1.0,1.0
8,0.0,1.0,1.0
11,0.0,2.0,0.0
12,1.0,2.0,0.0
13,1.0,3.0,0.0
14,0.0,3.0,0.0
15,0.0,2.0,1.0
16,1.0,2.0,1.0
17,1.0,3.0,1.0
18,0.0,3.0,1.0
*NSET,NSET=DISP
2,3,6,7
*NSET,NSET=DISP1
12,13,16,17
**
*NSET,NSET=YZPLANE1
1,5,4,8
*NSET,NSET=YZPLANE2
11,15,14,18
*NSET,NSET=YZPLANE
YZPLANE1,YZPLANE2
**
*NSET,NSET=XZPLANE1
1,2,6,5
*NSET,NSET=XZPLANE2
11,12,16,15
*NSET,NSET=XZPLANE
XZPLANE1,XZPLANE2
**
*NSET,NSET=XYPLANE1
1,2,3,4
*NSET,NSET=XYPLANE2
11,12,13,14
*NSET,NSET=XYPLANE
XYPLANE1,XYPLANE2
**
*ELEMENT,TYPE=C3D8,ELSET=EALL
1,1,2,3,4,5,6,7,8
11,11,12,13,14,15,16,17,18
*DISTRIBUTION TABLE, NAME=DISTTABLEORI
 COORD3D, COORD3D
*DISTRIBUTION, NAME=DISTORI, TABLE=DISTTABLEORI, LOCATION=ELEMENT
     , 1.,0.,0., 0.,1.,0.
 EALL, 1.,1.,1., -1.,1.,1.
*DISTRIBUTION TABLE, NAME=DISTTABLEORIANGLE
 ANGLE
*DISTRIBUTION, NAME=DISTORIANGLE, TABLE=DISTTABLEORIANGLE, LOCATION=ELEMENT
  , 20.
 EALL, 0.
*ORIENTATION, NAME=ORI
 DISTORI
 3, DISTORIANGLE
*SOLID SECTION,ELSET=EALL,MATERIAL=MAT1, ORIENTATION=ORI
1.0,
*DISTRIBUTION TABLE, NAME=DIST_TABLE_ANISO
          MODULUS, MODULUS, MODULUS, MODULUS, MODULUS, MODULUS, MODULUS
 MODULUS, MODULUS, MODULUS, MODULUS, MODULUS, MODULUS, MODULUS, MODULUS
 MODULUS, MODULUS, MODULUS, MODULUS, MODULUS, MODULUS
*DISTRIBUTION, NAME=DISTANISO, LOCATION=ELEMENT, TABLE=DIST_TABLE_ANISO
   , 2.69230769E11,  1.15384615E11, 2.69230769E11,1.15384615E11,1.15384615E11,2.69230769E11, 0.,
 0.,             0.,0.769230769E11,            0.,           0.,           0.,           0., 0.769230769E11,
 0.,             0.,            0.,            0.,           0.,0.769230769E11
*MATERIAL,NAME=MAT1
*ELASTIC,TYPE=ANISOTROPIC
 DISTANISO
*PLASTIC
300.E8,0.0
350.E8,0.1
*STEP,NLGEOM
*STATIC
.1,1.
*BOUNDARY
XYPLANE,3,3
YZPLANE,1,1
XZPLANE,2,2
DISP,1,1,-0.2
DISP1,1,1,-0.1
*OUTPUT,FIELD,VARIABLE=PRESELECT
*ELEMENT OUTPUT
S, 
EE,
PE,
*NODE OUTPUT
COORD
*END STEP
*STEP,NLGEOM
*STATIC
.1,1.
*BOUNDARY, OP=MOD
DISP1,1,1,-0.2
*END STEP