*HEADING
 CONTINUUM ELEMENTS: MODEL CHANGE VERIFICATION, ELASTIC MATERIAL
 Coupled temperature-displacement elements
*PREPRINT,MODEL=YES,HISTORY=NO
**
** TEST 31: CGAX4T
**
*NODE,NSET=NALL
50001,  55.0, -9.0
50002,  56.0, -9.0
50003,  56.0, -10.0
50004,  55.0, -10.0
50005,  57.0, -9.0
50006,  57.0, -10.0
50007,  55.0, -12.0
50008,  56.5, -12.1
50009,  56.5, -13.1
50010,  55.0, -13.0
50011,  58.0, -12.2
50012,  58.0, -13.2
*NSET,NSET=LEFT
50001,50004,50007,50010
*NSET,NSET=MID
50008,50009
*NSET,NSET=RIGHT
50011,50012
*NSET,NSET=TIP
50005,50006,50011,50012
*ELEMENT,TYPE=CGAX4T,ELSET=TEST31
50001, 50004,50003,50002,50001
50002, 50003,50006,50005,50002
50003, 50010,50009,50008,50007
50004, 50009,50012,50011,50008
*ELSET,ELSET=REFER
50001,50002
*ELSET,ELSET=TEST
50003,50004
**
** TEST 32: CGAX8T
**
*NODE,NSET=NALL
60001,  55.0, -18.0
60002,  56.0, -18.0
60003,  56.0, -19.0
60004,  55.0, -19.0
60005,  57.0, -18.0
60006,  57.0, -19.0
60007,  57.0, -18.5
60008,  55.0, -18.5
60009,  55.0, -21.0
60010,  56.5, -21.1
60011,  56.5, -22.1
60012,  55.0, -22.0
60013,  58.0, -21.2
60014,  58.0, -22.2
60015,  58.0, -21.7
60016,  55.0, -21.5
*NSET,NSET=LEFT
60001,60004,60008,60009,60012,60016
*NSET,NSET=MID
60010,60011
*NSET,NSET=RIGHT
60013,60014,60015
*NSET,NSET=TIP
60005,60006,60007,60013,60014,60015
*ELEMENT,TYPE=CGAX8T,ELSET=TEST32
60001, 60001,60004,60006,60005,60008,60003,60007,60002
60002, 60009,60012,60014,60013,60016,60011,60015,60010
*ELSET,ELSET=REFER
60001, 
*ELSET,ELSET=TEST
60002, 
**
**  REMAINDER OF INPUT DECK SAME FOR ALL TESTS
**
*ELSET,ELSET=EALL
TEST,REFER
*SOLID SECTION,MATERIAL=ELAS,ELSET=EALL
1.0, 
*MATERIAL,NAME=ELAS
*ELASTIC
1000., .25
*EXPANSION
1.E-3, 
*DENSITY
1.E-3, 
*CONDUCTIVITY
1.0, 
*INITIAL CONDITIONS,TYPE=TEMPERATURE
NALL,70.
*AMPLITUDE,NAME=RAMP
0.,0.,  1.,1.
**
**
*STEP,NLGEOM
 STEP #1: DISPLACE TEST SPECIMEN SO FINAL SHAPE IS
          IDENTICAL TO INITIAL SHAPE OF REFERENCE ELEMENT 
**STATIC
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
0.25,1.
*PRINT,MODEL CHANGE=YES
*BOUNDARY,OP=NEW
NALL,5
LEFT,1,2
RIGHT,1,1,-1.0
RIGHT,2,2, 0.2
MID,1,1,-0.5
MID,2,2, 0.1
*NODE PRINT,FREQ=999
RF, 
*EL PRINT,FREQ=999
S,
*EL PRINT,FREQ=999
E,
*NODE FILE,FREQ=999
RF, 
*EL FILE,FREQ=999
E, S
*END STEP
**
**
*STEP
 STEP #2: REMOVE TEST ELEMENTS
**STATIC
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
1,1.
*MODEL CHANGE,REMOVE,TYPE=ELEMENT
TEST,
*END STEP
**
**
*STEP
 STEP #3: ADD TEST ELEMENTS BACK IN STRAIN-FREE
**STATIC
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
1.,1.
*MODEL CHANGE,ADD=STRAINFREE,TYPE=ELEMENT
TEST, 
*BOUNDARY,OP=NEW
NALL,5
LEFT,1,2
*END STEP
**
**
*STEP
 STEP #4: APPLY LOAD TO BOTH ELEMENTS 
**STATIC
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
0.1,1.
*DLOAD
TEST,P3,-0.25
REFER,P3,-0.25
*END STEP
**
**
*STEP
 STEP #5: REMOVE TEST ELEMENT
**STATIC
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
.1,1.0
*MODEL CHANGE,REMOVE,TYPE=ELEMENT
TEST,
*END STEP
**
**
*STEP
 STEP #6: ADD TEST ELEMENTS BACK IN WITH-STRAIN
**STATIC
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
.1,1.0
*MODEL CHANGE,ADD=WITHSTRAIN,TYPE=ELEMENT
TEST,
*END STEP
**
**
*STEP
 STEP #7: APPLY THERMAL LOAD
*COUPLED TEMPERATURE-DISPLACEMENT,STEADY STATE
.1,1.0
*BOUNDARY,OP=NEW,FIXED
NALL,5
TIP,1
LEFT,1,2
*BOUNDARY,OP=NEW
NALL,11,11,100.
*EL PRINT,FREQ=999
S,
*EL PRINT,FREQ=999
THE,TEMP
*EL FILE,FREQ=999
S,THE,TEMP
*END STEP