*HEADING
*NODE
1,
11,5.
401,,2.
411,5.,2.
999, 0., 0.
*NGEN,NSET=BOT
1,11,1
*NGEN,NSET=TOP
401,411,1
*NFILL,NSET=NALL
BOT,TOP,4,100
*NSET, NSET=XFIX, GEN
1, 401, 100
*NSET, NSET=YFIX
1, 
*NSET, NSET=YFIX2
11, 
*NSET, NSET=XMOVE, GEN
11, 411, 100
*NSET, NSET=YMOVE, GEN
204, 208, 1
404, 408, 1
*ELEMENT,TYPE=CPEG4RT,ELSET=EALL
1,1,3,203,201
*ELGEN,ELSET=EALL
1,5,2,1,2,200,5
*ELSET, ELSET=EREMOV
2,3,4,7,8,9
*ELSET, ELSET=QA_TEST
1,2,3,4,5,7,8,9,10
*SOLID SECTION,MATERIAL=RUBBER,ELSET=EALL, REF NODE=999
1.,
*MATERIAL,NAME=RUBBER
*HYPERELASTIC, N=1
56.00E4, 14.00E4, 1.43E-7
*CONDUCTIVITY
7.872e-04
*DENSITY
0.2829
*BOUNDARY
YFIX, 2, 2
XFIX, 1,1
YFIX2, 2,2
*STEP, NLGEOM 
 COMPRESS ELEMENTS
*STATIC
0.1,1.,0.1,0.1
*BOUNDARY
XMOVE, 1,1 ,-0.1
** Control parameters needed for ABAQUS QA purposes only
*Controls,Parameters=Field
 1.e-6,,,1.,,1e-10
*NODE PRINT,FREQ=999
U, 
RF, 
*EL PRINT,FREQ=999
E, 
S, 
*NODE FILE,FREQ=999
U, RF
*EL FILE,FREQ=999
E, NE, S
*OUTPUT, FIELD, FREQ=999
*NODE OUTPUT, NSET=NALL
U, RF
*ELEMENT OUTPUT, ELSET=QA_TEST
S,
*END STEP
*STEP, NLGEOM
 REMOVE MIDDLE ELEMENTS
*STATIC
1.,1.
*MODEL CHANGE,REMOVE,TYPE=ELEMENT
EREMOV,
*END STEP
*STEP, NLGEOM 
 MOVE REMOVED NODES BACK IN 
*STATIC
1.,1.
*BOUNDARY
YMOVE, 2,2, 0.0
*END STEP
*STEP, NLGEOM 
 ADD ELEMENTS BACK IN ANNEALED
*STATIC
0.1,1.,0.1,0.1
*MODEL CHANGE,ADD,TYPE=ELEMENT
EREMOV, 
*BOUNDARY,OP=NEW
YFIX, 2, 2
XFIX, 1,1
YFIX2, 2,2
XMOVE, 1,1 ,0.1
*END STEP