*Heading
*Node
 1,
 11,5.
 401,,2.
 411,5.,2.
 999, 0., 0.
*Ngen,Nset=Bot
 1,11,1
*Ngen,Nset=Top
 401,411,1
*Nfill,Nset=Nall
 Bot,Top,4,100
*Nset, Nset=Xfix, Gen
 1, 401, 100
*Nset, Nset=Yfix
 1, 
*Nset, Nset=Yfix2
 11, 
*Nset, Nset=Xmove, Gen
 11, 411, 100
*Nset, Nset=Ymove, Gen
 204, 208, 1
 404, 408, 1
*Element,Type=cpeg4rht,Elset=Eall
 1,1,3,203,201
*Elgen,Elset=Eall
 1,5,2,1,2,200,5
*Elset, Elset=Eremov
 2,3,4,7,8,9
*Solid Section,Material=Rubber,Elset=Eall, Ref Node=999
 1.,
*Material,Name=Rubber
*Elastic
 4064385.018,0.451566
*Conductivity
 7.872e-04
*Density
 0.2829
*Boundary
 Yfix, 2, 2
 Xfix, 1,1
 Yfix2, 2,2
*Step, Nlgeom 
 Compress Elements
*Static
 0.1,1.,0.1,0.1
** Control parameters needed for ABAQUS QA purposes only
*Controls,Parameters=Field
 1.e-6,,,,,1e-10
*Boundary
 Xmove, 1,1 ,-0.1
*Node Print,Freq=999
 U, 
 Rf, 
*El Print,Freq=999
 E, 
 S, 
*Node File,Freq=999
 U, Rf
*El File,Freq=999
 E, Ne, S
*Output, Field, Freq=999
*Element Output
 Hfl, E, S
*Node Output
 Rf, U
*End Step
*Step, Nlgeom
 Remove Middle Elements
*Static
 1.,1.
*Model Change,Remove,Type=Element
 Eremov,
*End Step
*Step, Nlgeom 
 Move Removed Nodes Back In 
*Static
 1.,1.
*Boundary
 Ymove, 2,2, 0.0
*End Step
*Step, Nlgeom 
 Add Elements Back In Annealed
*Static
 0.1,1.,0.1,0.1
*Model Change,Add,Type=Element
 Eremov, 
*Boundary,Op=New
 Yfix, 2, 2
 Xfix, 1,1
 Yfix2, 2,2
 Xmove, 1,1 ,0.1
*End Step