*HEADING
 PMCE_CGAX4RH_SE:  CGAX4RH MODEL CHANGE VERIFICATION, ELASTIC MATERIAL
 WITHOUT NLGEOM
*NODE
1,2.
11,2.,5.
401,
411,,5.
*NGEN,NSET=RHS
1,11,1
*NGEN,NSET=LHS
401,411,1
*NFILL,NSET=NALL
RHS,LHS,4,100
*NSET, NSET=YFIX, GEN
1, 401, 100
*NSET, NSET=XFIX
1, 
*NSET, NSET=XFIX2
11, 
*NSET, NSET=YMOVE, GEN
11, 411, 100
*NSET, NSET=XMOVE, GEN
204, 208, 1
4, 8, 1
*ELEMENT,TYPE=CGAX4RH,ELSET=EALL
1,1,3,203,201
*ELGEN,ELSET=EALL
1,5,2,1,2,200,5
*ELSET, ELSET=EREMOV
2,3,4,7,8,9
*SOLID SECTION,MATERIAL=RUBBER,ELSET=EALL
1.,
*MATERIAL,NAME=RUBBER
*ELASTIC
4064385.018,0.451566
*BOUNDARY
YFIX, 2, 2
YFIX, 5, 5
YMOVE, 5, 5
*STEP
 COMPRESS ELEMENTS
*STATIC
0.1,1.,0.1,0.1
*BOUNDARY
YMOVE, 2,2 ,-0.1
*NODE PRINT,FREQ=999
U, 
RF, 
*EL PRINT,FREQ=999
E, 
S, 
*NODE FILE,FREQ=999
U, RF
*EL FILE,FREQ=999
E, NE, S
*END STEP
*STEP
REMOVE MIDDLE ELEMENTS
*STATIC
1.,1.
*MODEL CHANGE,REMOVE,TYPE=ELEMENT
EREMOV,
*END STEP
*STEP
 MOVE TOP EDGE DOWN
*STATIC
1.,1.
*BOUNDARY
XMOVE, 1,1, 0.0
*END STEP
*STEP
 ADD ELEMENTS BACK IN
*STATIC
0.1,1.,0.1,0.1
*MODEL CHANGE,ADD,TYPE=ELEMENT
EREMOV,
*BOUNDARY,OP=NEW
YFIX, 2, 2
YFIX, 5, 5
YMOVE, 2,2 ,0.1
*END STEP