*HEADING
Global analysis: 9 x 9 mesh with cpe4t.     File name: 
*NODE,NSET=ALL
 1, 1.
91, 8.
100, 8.,7.
10, 1.,7.
*NGEN,NSET=NL
1,10,1
*NGEN,NSET=NR
91,100
*NFILL,NSET=ALL
NL,NR,9,10
*NSET,NSET=FIX1,GEN
 1,91,10
*NSET,NSET=FIX2,GEN
91,100
*NSET,NSET=FIX3,GEN
10,100,10
*NSET,NSET=FIX4,GEN
1,10
*NSET,NSET=DRIVE
        21,        22,        23,        24,        25,        26,        27,        28,        31,        32,        33,        34,
        35,        36,        37,        38,        47,        48,        57,        58,        67,        68,        77,        78,
        87,        88,        97,        98,
*ELEMENT, TYPE=CPE4T, ELSET=EALL
 1, 1,11,12,2
*ELGEN,ELSET=EALL
1,9,1,1,9,10,10
*ELSET,ELSET=EFLUX2,GEN
81,98
*ELSET,ELSET=SUBELSET
21,22,23,24,25,26,27,37,47,57,67,77,87
*SOLID SECTION,MATERIAL=A1, ELSET=EALL
*MATERIAL,NAME=A1
*ELASTIC
 30.E6, .3
*EXPANSION
 1.E-5, 
*CONDUCTIVITY
 3.77E-5, 
*SPECIFIC HEAT
 .39, 
*DENSITY
 82.9, 
*RESTART,WRITE
*STEP
*COUPLED TEMPERATURE-DISPLACEMENT, STEADY STATE
 .000001, .000001
*BOUNDARY, OP=NEW
** ALL, 1, 1, .00001
** ALL, 2, 2, .000005
 FIX1,2
 FIX4,1
 FIX4, 11
*DFLUX,OP=NEW
 EFLUX2, S2, .3
*ENERGY FILE
*OUTPUT,HISTORY,FREQUENCY=1
*ENERGY OUTPUT,VARIABLE=PRESELECT
*EL FILE
 E,S 
 LOADS,FLUXS
 FILM,RAD
*OUTPUT,FIELD
*ELEMENT OUTPUT
E,S
*NODE FILE,NSET=DRIVE
 U, 
 RF, 
 NT, 
 RFL, 
*OUTPUT,FIELD
*NODE OUTPUT,NSET=DRIVE
U,
RF,
NT,
RFL,
*EL PRINT
 E,S
 LOADS,FLUXS
 FILM,RAD
*NODE PRINT
 U, 
 RF, 
 NT, 
 RFL, 
*END STEP