*HEADING
RATE DEPENDENT MISES PLASTICITY, UNIAXIAL TENSION TEST, C3D8
**TESTING FOR TEMPERATURE DEPENDENCIES
*NODE,NSET=ALLN
1,0.,0.,0.
2,1.,0.,0.
3,1.,1.,0.
4,0.,1.,0.
5,0.,0.,1.
6,1.,0.,1.
7,1.,1.,1.
8,0.,1.,1.
*ELEMENT,TYPE=C3D8,ELSET=ALLE
1,1,2,3,4,5,6,7,8
*Distribution Table, name=distTableElastic
 modulus, ratio
*Distribution, name=distElastic, table=distTableElastic, location=element
 , 10.e3, 0.25
 alle, 200.0e3, 0.3
*SOLID SECTION,ELSET=ALLE,MATERIAL=ALLE
*MATERIAL,NAME=ALLE
*ELASTIC
distElastic
*PLASTIC
200.,0.
220.,.0009
220.,.0029
*RATE DEPENDENT,TYPE=YIELD RATIO
1.0 , 0.0   , 10.0
1.07, 0.01  , 10.0
1.15, 0.1   , 10.0
1.32, 1.0   , 10.0
1.69, 10.0  , 10.0
2.50, 100.0 , 10.0
4.22, 1000.0, 10.0
**
1.0 , 0.0   , 20.0
1.30, 0.01  , 20.0
1.42, 0.1   , 20.0
1.57, 1.0   , 20.0
1.8 , 10.0  , 20.0
2.10, 100.0 , 20.0
2.53, 1000.0, 20.0
*INITIAL CONDITIONS, TYPE=TEMPERATURE
ALLN, 15.0
*BOUNDARY
1,PINNED
2,2
5,2
6,2
4,1
5,1
8,1
2,3
3,3
4,3
*STEP,INC=20
*STATIC,DIRECT
1.E-3,20.E-3
*BOUNDARY
7,3,,.004
5,3,,.004
6,3,,.004
8,3,,.004
*EL PRINT
S, 
SINV, 
E, 
PE, 
EE, 
*NODE PRINT
U,RF
*EL FILE,FREQ=10
S,E,PE
*END STEP