*heading
        mises plasticity with combined 
        isotropic-kinematic hardening
        with multiple backstresses,
	sax1 element under uniaxial tension
	Temperature and Field variable dependence
*part, name=part-1
*node, nset=nall
1,1
2,1,1
*element,type=sax1,elset=alle
1,1,2
*shell section, elset=alle, material=steel
0.1, 
*end part
*assembly, name=assembly-1
*instance, name=part-1-1, part=part-1
*end instance
*end assembly
*material, name=steel
*elastic
200.E3,.3
*density
 7.82000e-09,
*plastic, hardening=combined, data type=parameters, dependencies=1,
 numberbackstress=3
200., 1.111E4,34.65, 5.555E3,34.65, 5.555E3,0.0, 0., 
 0.
200., 1.111E4,34.65, 5.555E3,34.65, 5.555E3,0.0, 100., 
 0.
200., 1.111E4,34.65, 5.555E3,34.65, 5.555E3,0.0, 100., 
 100.
*cyclic hardening, parameters, dependencies=1
200., 2000., 0.25, 0., 0.,
200., 1500., 0.25, 100., 0.,
200., 1000., 0.25, 100., 100.,
*boundary
assembly-1.part-1-1.1,2
assembly-1.part-1-1.1,6
*rest,w
*initial conditions, type=temperature
assembly-1.part-1-1.nall,0.
*initial conditions, type=field,variable=1
assembly-1.part-1-1.nall,0.
**step 1 tension***
*amplitude,name=smoothing_curve,definition=smooth step
 0., 0., 10e-3, 1.
*step,nlgeom=no
*dynamic,explicit
 ,10e-3
*boundary,amplitude=smoothing_curve
assembly-1.part-1-1.2,2,2,0.04
*elset, elset=qa_test_alle
assembly-1.part-1-1.alle
*nset, nset=qa_test_nall
assembly-1.part-1-1.nall
*output, field
*element output, elset=assembly-1.part-1-1.alle
 S, LE, PE, PEEQ, ALPHA
*node output, nset=assembly-1.part-1-1.nall
 U, RF
*output, field, num=2
*element output, elset=qa_test_alle
 S, LE, PE, PEEQ, ALPHA
*node output, nset=qa_test_nall
 U
*output, history, variable=preselect
*element output, elset=assembly-1.part-1-1.alle
 S, PE, LE, PEEQ, ALPHA, ALPHAP
*output, history, timeint=0.001
*element output, elset=qa_test_alle
 S, PE, LE, PEEQ, ALPHA, ALPHAP
*file output, number interval = 10
*el file, elset=assembly-1.part-1-1.alle
 PEEQ, ALPHA, ALPHAP
*end step
*step
*dynamic,explicit
 ,10e-3
*temperature,amplitude=smoothing_curve
assembly-1.part-1-1.nall,100
*endstep
*step
*dynamic,explicit
 ,10e-3
*field,amplitude=smoothing_curve
assembly-1.part-1-1.nall,100
*endstep