*HEADING
 RATE DEPENDENT FOAM PLASTICITY, UNIAXIAL COMPRESSION TEST, C3D8
 TEMPERATURE DEPENDENT YIELD RATIOS
*NODE,NSET=FACE1
 1, 0., 0., 0.
 2, 1., 0., 0.
 3, 1., 1., 0.
 4, 0., 1., 0.
*NODE,NSET=FACE2
 5, 0., 0., 1.
 6, 1., 0., 1.
 7, 1., 1., 1.
 8, 0., 1., 1.
*NSET,NSET=FACE3
 1, 2, 5, 6
*NSET,NSET=FACE4
 2, 3, 6, 7
*NSET,NSET=FACE5
 3, 4, 7, 8
*NSET,NSET=FACE6
 1, 4, 5, 8
*NSET,NSET=ALLN
 FACE1, FACE2
*NSET,NSET=OUT
 7,
*ELEMENT,TYPE=C3D8,ELSET=FOAM
 1, 1, 2, 3, 4, 5, 6, 7, 8
*SOLID SECTION,ELSET=FOAM,MATERIAL=FOAM
*MATERIAL,NAME=FOAM
*ELASTIC
 3.E6, 0.2
*CRUSHABLE FOAM
 1.1, 0.1
*CRUSHABLE FOAM HARDENING
 2.200E5,  0.0
 2.465E5,  0.1
 2.729E5,  0.2
 2.990E5,  0.3
 3.245E5,  0.4
 3.493E5,  0.5
 3.733E5,  0.6
 3.962E5,  0.7
 4.180E5,  0.8
 4.387E5,  0.9
 4.583E5,  1.0
 4.938E5,  1.2
 5.248E5,  1.4
 5.515E5,  1.6
 5.743E5,  1.8
 5.936E5,  2.0
 6.294E5,  2.5
 6.520E5,  3.0
 6.833E5,  5.0
 6.883E5, 10.0
*RATE DEPENDENT,TYPE=YIELD RATIO
   1.0,    0.0, 10.
  91.0, 1000.0, 10.
   1.0,    0.0, 20.
 111.0, 1000.0, 20.
**
*INITIAL CONDITIONS,TYPE=TEMPERATURE
 ALLN, 15.
*BOUNDARY
 FACE1, 3
 FACE3, 2
 FACE6, 1
**
*STEP,INC=20,NLGEOM,UNSYMM=YES
*STATIC,DIRECT
 1.E-2, 20.E-2
*BOUNDARY
 FACE2, 3, 3, -0.6
**
*EL PRINT
 S, 
 LE, 
 PE, 
*NODE PRINT
 U, 
 RF, 
*EL FILE
 S, 
 LE, 
 PE, 
*NODE FILE
 U, 
 RF, 
**
*OUTPUT,FIELD,FREQ=10
*ELEMENT OUTPUT
 S, 
 PE,
 LE,
*OUTPUT,HISTORY,FRE=1
*ELEMENT OUTPUT,ELSET=FOAM
 MISES,
 PRESS,
 PEEQ,
 LE33,
*NODE OUTPUT,NSET=OUT
 U3,
 RF3,
**
*END STEP