*Heading Model change test ** Job name: Job-1 Model name: Model-1 ** Generated by: Abaqus/CAE 6.10-DEV *Preprint, echo=YES, model=YES, history=Yes, contact=NO ** ** PARTS ** *Part, name=Part-1 *End Part ** ** ** ASSEMBLY ** *Assembly, name=Assembly ** *Instance, name=Part-1-1, part=Part-1 *Node 1, 20., -20., 5. 2, 13.333333, -20., 5. 3, 6.66666651, -20., 5. 4, 0., -20., 5. 5, -6.66666651, -20., 5. 6, -13.333333, -20., 5. 7, -20., -20., 5. 8, 20., -20., 0. 9, 13.333333, -20., 0. 10, 6.66666651, -20., 0. 11, 0., -20., 0. 12, -6.66666651, -20., 0. 13, -13.333333, -20., 0. 14, -20., -20., 0. 15, 20., -13.333333, 5. 16, 13.333333, -13.333333, 5. 17, 6.66666651, -13.333333, 5. 18, 0., -13.333333, 5. 19, -6.66666651, -13.333333, 5. 20, -13.333333, -13.333333, 5. 21, -20., -13.333333, 5. 22, 20., -13.333333, 0. 23, 13.333333, -13.333333, 0. 24, 6.66666651, -13.333333, 0. 25, 0., -13.333333, 0. 26, -6.66666651, -13.333333, 0. 27, -13.333333, -13.333333, 0. 28, -20., -13.333333, 0. 29, 20., -6.66666651, 5. 30, 13.333333, -6.66666651, 5. 31, 6.66666651, -6.66666651, 5. 32, 0., -6.66666651, 5. 33, -6.66666651, -6.66666651, 5. 34, -13.333333, -6.66666651, 5. 35, -20., -6.66666651, 5. 36, 20., -6.66666651, 0. 37, 13.333333, -6.66666651, 0. 38, 6.66666651, -6.66666651, 0. 39, 0., -6.66666651, 0. 40, -6.66666651, -6.66666651, 0. 41, -13.333333, -6.66666651, 0. 42, -20., -6.66666651, 0. 43, 20., 0., 5. 44, 13.333333, 0., 5. 45, 6.66666651, 0., 5. 46, 0., 0., 5. 47, -6.66666651, 0., 5. 48, -13.333333, 0., 5. 49, -20., 0., 5. 50, 20., 0., 0. 51, 13.333333, 0., 0. 52, 6.66666651, 0., 0. 53, 0., 0., 0. 54, -6.66666651, 0., 0. 55, -13.333333, 0., 0. 56, -20., 0., 0. 57, 20., 6.66666651, 5. 58, 13.333333, 6.66666651, 5. 59, 6.66666651, 6.66666651, 5. 60, 0., 6.66666651, 5. 61, -6.66666651, 6.66666651, 5. 62, -13.333333, 6.66666651, 5. 63, -20., 6.66666651, 5. 64, 20., 6.66666651, 0. 65, 13.333333, 6.66666651, 0. 66, 6.66666651, 6.66666651, 0. 67, 0., 6.66666651, 0. 68, -6.66666651, 6.66666651, 0. 69, -13.333333, 6.66666651, 0. 70, -20., 6.66666651, 0. 71, 20., 13.333333, 5. 72, 13.333333, 13.333333, 5. 73, 6.66666651, 13.333333, 5. 74, 0., 13.333333, 5. 75, -6.66666651, 13.333333, 5. 76, -13.333333, 13.333333, 5. 77, -20., 13.333333, 5. 78, 20., 13.333333, 0. 79, 13.333333, 13.333333, 0. 80, 6.66666651, 13.333333, 0. 81, 0., 13.333333, 0. 82, -6.66666651, 13.333333, 0. 83, -13.333333, 13.333333, 0. 84, -20., 13.333333, 0. 85, 20., 20., 5. 86, 13.333333, 20., 5. 87, 6.66666651, 20., 5. 88, 0., 20., 5. 89, -6.66666651, 20., 5. 90, -13.333333, 20., 5. 91, -20., 20., 5. 92, 20., 20., 0. 93, 13.333333, 20., 0. 94, 6.66666651, 20., 0. 95, 0., 20., 0. 96, -6.66666651, 20., 0. 97, -13.333333, 20., 0. 98, -20., 20., 0. *Element, type=C3D8PT 1, 15, 16, 23, 22, 1, 2, 9, 8 2, 16, 17, 24, 23, 2, 3, 10, 9 3, 17, 18, 25, 24, 3, 4, 11, 10 4, 18, 19, 26, 25, 4, 5, 12, 11 5, 19, 20, 27, 26, 5, 6, 13, 12 6, 20, 21, 28, 27, 6, 7, 14, 13 7, 29, 30, 37, 36, 15, 16, 23, 22 8, 30, 31, 38, 37, 16, 17, 24, 23 9, 31, 32, 39, 38, 17, 18, 25, 24 10, 32, 33, 40, 39, 18, 19, 26, 25 11, 33, 34, 41, 40, 19, 20, 27, 26 12, 34, 35, 42, 41, 20, 21, 28, 27 13, 43, 44, 51, 50, 29, 30, 37, 36 14, 44, 45, 52, 51, 30, 31, 38, 37 15, 45, 46, 53, 52, 31, 32, 39, 38 16, 46, 47, 54, 53, 32, 33, 40, 39 17, 47, 48, 55, 54, 33, 34, 41, 40 18, 48, 49, 56, 55, 34, 35, 42, 41 19, 57, 58, 65, 64, 43, 44, 51, 50 20, 58, 59, 66, 65, 44, 45, 52, 51 21, 59, 60, 67, 66, 45, 46, 53, 52 22, 60, 61, 68, 67, 46, 47, 54, 53 23, 61, 62, 69, 68, 47, 48, 55, 54 24, 62, 63, 70, 69, 48, 49, 56, 55 25, 71, 72, 79, 78, 57, 58, 65, 64 26, 72, 73, 80, 79, 58, 59, 66, 65 27, 73, 74, 81, 80, 59, 60, 67, 66 28, 74, 75, 82, 81, 60, 61, 68, 67 29, 75, 76, 83, 82, 61, 62, 69, 68 30, 76, 77, 84, 83, 62, 63, 70, 69 31, 85, 86, 93, 92, 71, 72, 79, 78 32, 86, 87, 94, 93, 72, 73, 80, 79 33, 87, 88, 95, 94, 73, 74, 81, 80 34, 88, 89, 96, 95, 74, 75, 82, 81 35, 89, 90, 97, 96, 75, 76, 83, 82 36, 90, 91, 98, 97, 76, 77, 84, 83 *Nset, nset=_PickedSet2, internal, generate 1, 98, 1 *Elset, elset=_PickedSet2, internal, generate 1, 36, 1 *Nset, nset=Set-1, generate 85, 98, 1 *Elset, elset=Set-1, generate 31, 36, 1 ** Section: Section-1 *Solid Section, elset=_PickedSet2, material=Material-1 , *End Instance ** *Nset,nset=nall,generate,instance=Part-1-1 1,98 *Nset, nset=_PickedSet15, internal, instance=Part-1-1, generate 1, 92, 7 *Elset, elset=_PickedSet15, internal, instance=Part-1-1, generate 1, 31, 6 *Nset, nset=_PickedSet16, internal, instance=Part-1-1 1, 2, 3, 4, 5, 6, 7, 15, 16, 17, 18, 19, 20, 21, 29, 30 31, 32, 33, 34, 35, 43, 44, 45, 46, 47, 48, 49, 57, 58, 59, 60 61, 62, 63, 71, 72, 73, 74, 75, 76, 77, 85, 86, 87, 88, 89, 90 91, *Elset, elset=_PickedSet16, internal, instance=Part-1-1, generate 1, 36, 1 *Nset, nset=_PickedSet17, internal, instance=Part-1-1, generate 1, 14, 1 *Elset, elset=_PickedSet17, internal, instance=Part-1-1, generate 1, 6, 1 *Nset, nset=_PickedSet18, internal, instance=Part-1-1, generate 85, 98, 1 *Elset, elset=_PickedSet18, internal, instance=Part-1-1, generate 31, 36, 1 *Elset, elset=Set-1, instance=Part-1-1 15, 16, 21, 22 *Nset, nset=Set-2, instance=Part-1-1, generate 85, 98, 1 *Nset, nset=Set-3, instance=Part-1-1, generate 1, 92, 7 *Nset, nset=Set-4, instance=Part-1-1, generate 1, 14, 1 *Nset, nset=Set-5, instance=Part-1-1, generate 7, 98, 7 *Nset, nset=_PickedSet18_PP_, internal, instance=Part-1-1, generate 85, 98, 1 *End Assembly ** ** MATERIALS ** *Material, name=Material-1 *Density 1922. *Density,Pore fluid 1000. *Elastic 88.7e9,0.172 *Expansion 5.6e-6 *Expansion,Pore fluid 69.e-6 *Permeability, specific=9800. 1e-03,0. *Conductivity 3. *Conductivity,Pore fluid 0.58 *Specific heat 3000. *Specific heat,Pore fluid 4186. ** ** BOUNDARY CONDITIONS ** ** Name: BC-1 Type: Displacement/Rotation *Boundary _PickedSet15, 1, 1 ** Name: BC-2 Type: Displacement/Rotation *Boundary _PickedSet16, 3, 3 ** Name: BC-3 Type: Displacement/Rotation *Boundary _PickedSet17, 2, 2 ** Name: BC-4 Type: Pore pressure ** *initial conditions,type=temperature nall,0. *initial conditions,type=ratio nall,1. *initial conditions,type=pore nall,10. *initial conditions,type=saturation nall,1. ** ---------------------------------------------------------------- ** ** STEP: Step-1 ** *Step, name=Step-1 Model change *Soils, consolidation, end=PERIOD, utol=20., creep=none 1.e-04, 0.1, 1e-05, 1.e-2, ** ** OUTPUT REQUESTS ** *Boundary nall,11,11,0. _PickedSet18_PP_, 8, 8, 10. *Dload _PickedSet18,P1,2. *Restart, write, frequency=0 ** ** FIELD OUTPUT: F-Output-1 ** *Output, field, variable=PRESELECT ** ** HISTORY OUTPUT: H-Output-1 ** *Controls,Parameters=Field,Field=Pore Fluid Pressure ,,1.e-12 *Output, history, variable=PRESELECT *End Step *STEP STEP #2: REMOVE TEST ELEMENTS *SOILS 0.25, 1. *MODEL CHANGE,REMOVE,TYPE=ELEMENT SET-1, *END STEP *STEP STEP #3: ADD TEST ELEMENTS BACK IN STRAIN-FREE *SOILS 0.25, 1. *MODEL CHANGE,ADD=STRAINFREE,TYPE=ELEMENT SET-1, *END STEP *Step Model change *Soils, consolidation, end=PERIOD, utol=20., creep=none 1.e-04, 0.1, 1e-05, 1.e-2, ** ** OUTPUT REQUESTS ** *Boundary _PickedSet18_PP_, 8, 8, 10. *Dload _PickedSet18,P1,4. *Controls,Parameters=Field,Field=Pore Fluid Pressure ,,1.e-12 ** FIELD OUTPUT: F-Output-1 ** *Output, field, variable=PRESELECT ** ** HISTORY OUTPUT: H-Output-1 ** *Output, history, variable=PRESELECT *End Step *STEP *SOILS 0.25, 1. *MODEL CHANGE,REMOVE,TYPE=ELEMENT SET-1, *END STEP *STEP *SOILS 0.25, 1. *MODEL CHANGE,ADD=WITHSTRAIN,TYPE=ELEMENT SET-1, *END STEP