*Heading
 Basic Verification Of Field Dependence Of Conductivity
 Test Type: Material Verification  [dc3d20]
**
** See "Thermal Properties"  Of Abaqus/Verification 
** Manual -- Chapter 2.3.1
**
*Node,Nset=Nall
      1,           0.,           0.,           3.
      2,           0.,           1.,           3.
      3,           0.,           1.,           1.
      4,           0.,           0.,           1.
      5,           1.,           1.,           3.
      6,           1.,           1.,           1.
      7,           1.,           0.,           1.
      8,           1.,           0.,           3.
      9,           0.,           0.,           6.
     10,           0.,           1.,           6.
     11,           1.,           0.,           6.
     12,           1.,           1.,           6.
     13,           1.,           0.,           0.
     14,           1.,           1.,           0.
     15,           0.,           0.,           0.
     16,           0.,           1.,           0.
     17,           1.,           0.,           2.
     18,           1.,          0.5,           1.
     19,           1.,           1.,           2.
     20,           1.,          0.5,           3.
     21,           0.,          0.5,           3.
     22,           0.,           1.,           2.
     23,           0.,          0.5,           1.
     24,           0.,           0.,           2.
     25,          0.5,           1.,           3.
     26,          0.5,           0.,           3.
     27,          0.5,           1.,           1.
     28,          0.5,           0.,           1.
     29,           1.,           1.,          4.5
     30,           1.,          0.5,           6.
     31,           1.,           0.,          4.5
     32,           0.,           0.,          4.5
     33,           0.,          0.5,           6.
     34,           0.,           1.,          4.5
     35,          0.5,           0.,           6.
     36,          0.5,           1.,           6.
     37,           0.,           1.,          0.5
     38,           0.,          0.5,           0.
     39,           0.,           0.,          0.5
     40,           1.,           0.,          0.5
     41,           1.,          0.5,           0.
     42,           1.,           1.,          0.5
     43,          0.5,           0.,           0.
     44,          0.5,           1.,           0.
*Nset,Nset=Fvnods
  1,  2,  3,  4,  5,  6,  7,  8, 17, 18, 19, 20, 21, 22, 23, 24
 25, 26, 27, 28
*Nset,Nset=Hfvnods
 29, 31, 32, 34, 37, 39, 40, 42
*Nset,Nset=Left
 13, 14, 15, 16, 38, 41, 43, 44
*Nset,Nset=Right
  9, 10, 11, 12, 30, 33, 35, 36
*Element,Elset=K1k3,Type=dc3d20
 2,  5,  8, 11, 12,  2,  1,  9, 10, 20, 31, 30, 29, 21, 32, 33,
    34, 25, 26, 35, 36
 3,  3,  4, 15, 16,  6,  7, 13, 14, 23, 39, 38, 37, 18, 40, 41,
    42, 27, 28, 43, 44
*Element,Elset=K2fv,Type=dc3d20
1,  8,  5,  6,  7,  1,  2,  3,  4, 20, 19, 18, 17, 21, 22, 23,
   24, 26, 25, 27, 28
*Solid Section,Elset=K1k3,Material=Kconst
 3., 
*Solid Section,Elset=K2fv,Material=Kfvdep
 3., 
*Initial Conditions,Type=Temperature
 Nall,0.
*Initial Conditions,Type=Field
 Nall,0.
*Material,Name=Kconst
*Conductivity
 150., 
*Density
 7850.,
*Specific Heat
 460.,
*Material,Name=Kfvdep
*Conductivity,Dep=1
 1.,,25.
 10.,,50.
 100.,,75.
 1000,,100.
*Density
 7850.,
*Specific Heat
 460.,
*Amplitude,Name=Rise
 0.,0.,1.,1.
*Step
*Heat Transfer,Steady State
 .25,1.,.25,.25
*Boundary
 Left,11,11,1000.
 Right,11,11,0.
*Field,Variable=1,Amp=Rise
 Fvnods,100.
 Hfvnods,25.
*Node File
 Nt, 
*El File, Position=Centroidal
 Fv,
*El File, Position=Integration Points
 Fv,
*Output, Field
*Node Output
 Nt,
*Element Output, Position=Centroidal
 Fv,			  
*Element Output, Position=Integration Points
 Fv,
*End Step