*Heading
 Basic Verification Of Field Dependence Of Conductivity
 Test Type: Material Verification  [cpeg8rht]
**
** See "Thermal Properties"  Of Abaqus/Verification 
** Manual -- Chapter 2.3.1
**
*Node,Nset=Nall
 1, 
 2,1.
 3,3.
 4,6.
 5,0.5
 6,2.0
 7,4.5
 11, 0., 1.
 12, 1., 1.
 13, 3., 1.
 14, 6., 1.
 15,0.5, 1.
 16,2.0, 1.
 17,4.5, 1.
 21,0.,0.5
 22,1.,0.5
 23,3.,0.5
 24,6.,0.5
*Node,Nset=Refnd
 98, 0., 0.
*Nset,Nset=Fvnods
 2,3,6,12,13,16,22,23
*Nset,Nset=Hfvnods
 5,7,15,17
*Element,Elset=K1k3,Type=cpeg8rht
 1,1,2,12,11,5,22,15,21
 3,3,4,14,13,7,24,17,23
*Element,Elset=K2fv,Type=cpeg8rht
 2,2,3,13,12,6,23,16,22
*Solid Section,Elset=K1k3,Material=Kconst,Ref Node=98
 3., 
*Solid Section,Elset=K2fv,Material=Kfvdep,Ref Node=98
 3., 
*Initial Conditions,Type=Temperature
 Nall,0.
*Initial Conditions,Type=Field
 Nall,0.
*Material,Name=Kconst
*Elastic
 1.0,0.0
*Expansion
 0.0,
*Conductivity
 150., 
*Density
 7850.,
*Specific Heat
 460.,
*Material,Name=Kfvdep
*Elastic
 1.0,0.0
*Expansion
 0.0,
*Conductivity,Dep=1
 1.,,25.
 10.,,50.
 100.,,75.
 1000,,100.
*Density
 7850.,
*Specific Heat
 460.,
*Amplitude,Name=Rise
 0.,0.,1.,1.
*Step,Amp=Step
*Coupled Temperature-Displacement, Steady State
 .25,1.,.25,.25
*Boundary
 1, 11,,1000.
 4, 11,,0.
 11,11,,1000.
 14,11,,0.
 Nall,1,2
 Refnd, 3,5
*Field,Variable=1,Amp=Rise
 Fvnods,100.
 Hfvnods,50.
*Node File
 Nt, 
*El File, Position=Centroidal
 Fv,
*El File, Position=Integration Points
 Fv,
*Output, Field
*Node Output
 Nt,
*Element Output, Position=Centroidal
 Fv,			  
*Element Output, Position=Integration Points
 Fv,
*End Step