*Heading
 Basic Verification Of Field Dependence Of Conductivity
 Test Type: Material Verification  [cgax6mt]
**
** See "Thermal Properties"  Of Abaqus/Verification 
** Manual -- Chapter 2.3.1
**
*Node,Nset=Nall
  1,100.0,0.0 
  2,101.0,0.0 
  3,103.0,0.0 
  4,106.0,0.0 
  5,100.5,0.0 
  6,102.0,0.0 
  7,104.5,0.0 
 11,100.0,1.0
 12,101.0,1.0
 13,103.0,1.0
 14,106.0,1.0
 15,100.5,1.0
 16,102.0,1.0
 17,104.5,1.0
 21,100.0,0.5
 22,101.0,0.5
 23,103.0,0.5
 24,106.0,0.5
 25,100.5,0.5
 26,102.0,0.5
 27,104.5,0.5
*Nset,Nset=Fvnods
 2,3,6,12,13,16,22,23,26
*Nset,Nset=Hfvnods
 5,7,15,17,25,27
*Nset,Nset=Left
 1,11,21
*Nset,Nset=Right
 4,14,24
*Element,Elset=K1k3,Type=cgax6mt
 1, 1,2,12,5,22,25
 2, 12,11,1,15,21,25
 5, 3,4,14,7,24,27
 6, 14,13,3,17,23,27
*Element,Elset=K2fv,Type=cgax6mt
 3, 2,3,13,6,23,26
 4, 13,12,2,16,22,26
*Solid Section,Elset=K1k3,Material=Kconst
 3., 
*Solid Section,Elset=K2fv,Material=Kfvdep
 3., 
*Initial Conditions,Type=Temperature
 Nall,0.
*Initial Conditions,Type=Field
 Nall,0.
*Material,Name=Kconst
*Elastic
 1.0,0.0
*Expansion
 0.0,
*Conductivity
 150., 
*Density
 7850.,
*Specific Heat
 460.,
*Material,Name=Kfvdep
*Elastic
 1.0,0.0
*Expansion
 0.0,
*Conductivity,Dep=1
 1.,,25.
 10.,,50.
 100.,,75.
 1000,,100.
*Density
 7850.,
*Specific Heat
 460.,
*Amplitude,Name=Rise
 0.,0.,1.,1.
*Step,Amp=Step
*Coupled Temperature-Displacement, Steady State
 .25,1.,.25,.25
*Boundary
 Left, 11, 11, 1000.
 Right,11, 11, 0.
 Nall,1,2
 Nall,5,5
*Field,Variable=1,Amp=Rise
 Fvnods,100.
 Hfvnods,50.
*Node File
 Nt, 
*El File, Position=Centroidal
 Fv,
*El File, Position=Integration Points
 Fv,
*Output, Field
*Node Output
 Nt,
*Element Output, Position=Centroidal
 Fv,			  
*Element Output, Position=Integration Points
 Fv,
*End Step