*heading
*node
  1,      1.,        1.,        1.
  2,  1.3536,    1.3536,    1.8660
  3,  0.6464,    1.3536,    1.8660
  4,  0.6464,    0.6464,    1.8660
  5,  1.3536,    0.6464,    1.8660
  6,  1.7071,    1.7071,    1.0000
  7,  0.2929,    1.7071,    1.0000
  8,  0.2929,    0.2929,    1.0000
  9,  1.7071,    0.2929,    1.0000
*element, type=conn3d2, elset=connAll
 1, 1, 2
 2, 1, 3
 3, 1, 4
 4, 1, 5
 5, 1, 6
 6, 1, 7
 7, 1, 8
 8, 1, 9
*distribution table, name=distOriTable
 coord3d, coord3d
*distribution, name=distOri, table=distOriTable, location=element
  , -0.7071,   -0.7071,         0,   -0.0000,    0.0000,   -1.0000
 1, -0.3536,    0.3536,         0,    0.6124,    0.6124,   -0.5000
 2, -0.3536,   -0.3536,         0,   -0.6124,    0.6124,   -0.5000
 3,  0.3536,   -0.3536,         0,   -0.6124,   -0.6124,   -0.5000
 4,  0.3536,    0.3536,         0,    0.6124,   -0.6124,   -0.5000
 5, -0.7071,    0.7071,         0,    0.0000,    0.0000,   -1.0000
 7,  0.7071,   -0.7071,         0,   -0.0000,   -0.0000,   -1.0000
 8,  0.7071,    0.7071,         0,    0.0000,   -0.0000,   -1.0000
*orientation, name=ori
 distOri
    1, 0.
*connector section, elset=connAll
 beam
 ori, ori
*boundary
 1, 1,6
*step, nlgeom
*static
 1., 1.
*cload
** CTF1 = 1, elements 1-4
    2,    1,   -0.707107
    3,    1,   -0.707107
    4,    1,    0.707107
    5,    1,    0.707107
    2,    2,    0.707107
    3,    2,   -0.707107
    4,    2,   -0.707107
    5,    2,    0.707107
** CTF2 = 1, elements 1-4
    2,    1,    1.224744
    3,    1,   -1.224744
    4,    1,   -1.224744
    5,    1,    1.224744
    2,    2,    1.224744
    3,    2,    1.224744
    4,    2,   -1.224744
    5,    2,   -1.224744
    2,    3,   -1.000000
    3,    3,   -1.000000
    4,    3,   -1.000000
    5,    3,   -1.000000
** CTF3 = 1, elements 1-4
    2,    1,   -1.060661
    3,    1,    1.060661
    4,    1,    1.060661
    5,    1,   -1.060661
    2,    2,   -1.060661
    3,    2,   -1.060661
    4,    2,    1.060661
    5,    2,    1.060661
    2,    3,   -2.598076
    3,    3,   -2.598076
    4,    3,   -2.598076
    5,    3,   -2.598076
** CTF1 = 1, elements 5-8
    6,    1,   -0.707107
    7,    1,   -0.707107
    8,    1,    0.707107
    9,    1,    0.707107
    6,    2,    0.707107
    7,    2,   -0.707107
    8,    2,   -0.707107
    9,    2,    0.707107
** CTF2 = 1, elements 5-8
    6,    3,   -2.
    7,    3,   -2.
    8,    3,   -2.
    9,    3,   -2.
** CTF3 = 1, elements 5-8
    6,    1,   -2.121320
    7,    1,    2.121320
    8,    1,    2.121320
    9,    1,   -2.121320
    6,    2,   -2.121320
    7,    2,   -2.121320
    8,    2,    2.121320
    9,    2,    2.121320
*output, field
*element output
 CU, CTF
*el print
 CTF
*end step