*HEADING
 THREE LAYER COMPOSITE PLATE - SOLID ELEMENTS (CRD20R)  
 UNITS: N, mm, sec
*NODE
 11, 0.0,  0.5, 0.0
 13, 0.0, -0.5, 0.0
 91, 0.0,  0.5, 2.5
 93, 0.0, -0.5, 2.5
*NGEN,NSET=LBOT
 11, 13
*NGEN,NSET=LTOP
 91, 93
*NFILL,NSET=LSIDE
 LBOT, LTOP, 8, 10
*NCOPY,CHANGE NUMBER=2000,OLD SET=LSIDE,SHIFT,NEW SET=RSIDE
 10.0, 0.0, 0.0
 0.0,
*NFILL,NSET=NALL
 LSIDE, RSIDE, 20, 100
*NSET,GENERATE,NSET=RSUP
 2051, 2053
*NSET,GENERATE,NSET=LSUP
 51, 53
*NSET,NSET=EDGE,GENERATE
 11, 2011, 100
 13, 2013, 100
 51, 2051, 100
 53, 2053, 100
 91, 2091, 100
 93, 2093, 100
*NSET,NSET=NOUT
 11,2012,2011,1051
*ELEMENT,TYPE=C3D20R
 11,  11, 13, 213, 211, 91, 93, 293, 291, 12, 113, 212, 111, 92, 193, 292, 
      191, 51, 53, 253, 251, 152, 112, 192, 52, 153, 252, 151
*ELGEN,ELSET=EALL
 11, 10, 200, 100
*ELSET,ELSET=EOUT
 411,
*SOLID SECTION,ELSET=EALL,COMPOSITE
 1.0, 5, LAMINA, PL0 
 1.0, 5, LAMINA, PL90
 1.0, 5, LAMINA, PL0
*MATERIAL,NAME=LAMINA
*ELASTIC,TYPE=ENGINEERING
 25.0E6, 1.0E6, 1.0E6,   0.25, 0.25, 0.25,  0.5E6, 0.5E6,
 0.2E6, 
*ORIENTATION,NAME=PL0
1,0,0,0,1,0
3,0
*ORIENTATION,NAME=PL90
1,0,0,0,1,0
3,90
*BOUNDARY
 EDGE, 2
 LSUP, 1, 3
 RSUP, 1, 3
*******************
*STEP
*STATIC
 1.0,1.0
*DLOAD
 EALL, P2NU
*EL PRINT
 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 S,MISES,PRESS
*EL FILE
 1,3,5, 6,8,10, 11,13,15
 S,E
*NODE PRINT
 U,RF
*NODE FILE
 U,RF
*END STEP