ProductsAbaqus/Standard Continuum elementsElements testedContinuum elements (excluding coupled temperature-displacement and pore pressure elements). Problem descriptionThe models consist of the same patches of elements used in the tests defined in Patch tests. The first step consists of an eigenvalue analysis of the model with no boundary conditions. The second step applies a uniform pressure load on all four edges and sets the NLGEOM parameter. The third step performs an eigenvalue analysis of the prestressed model with no boundary conditions. Results are printed only for the first and third steps. Results and discussionFor all elements the number of zero-energy modes for Steps 1 and 3 is the same and matches the number of rigid-body modes given in Eigenvalue extraction for single unconstrained elements. Input files
Beams, pipes, shellsElements testedBeams, pipes, general shells. Problem descriptionThe models consist of the same patches of elements used in the tests defined in Patch tests. There are no boundary conditions defined in these models. Results and discussionFor all elements the number of zero-energy modes matches the number of rigid-body modes given in Eigenvalue extraction for single unconstrained elements. Input files
|