Nodal variables

The output variables listed below are available in Abaqus/Explicit.

COORD

.fil: yes  .odb Field: yes  .odb History: yes  

Coordinates of the node. These are the current coordinates if the large-displacement formulation is being used.

COORn

.fil: no  .odb Field: no  .odb History: yes  

Coordinate n ($n=1,2,3$).

U

.fil: yes  .odb Field: yes  .odb History: yes  

Displacement components.

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

UT

.fil: no  .odb Field: yes  .odb History: yes  

Translational displacement components.

UMAG

.fil: no  .odb Field: no  .odb History: yes  

Magnitude of translational displacements.

UR

.fil: no  .odb Field: yes  .odb History: yes  

Rotational displacement components.

Un

.fil: no  .odb Field: no  .odb History: yes  

$u_n$ displacement component ($n=1,2,3$).

URn

.fil: no  .odb Field: no  .odb History: yes  

${\varphi }_n$ rotation component ($n=1,2,3$).

V

.fil: yes  .odb Field: yes  .odb History: yes  

Velocity components (both translation and rotation).

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

VT

.fil: no  .odb Field: yes  .odb History: yes  

Translational velocity components.

VMAG

.fil: no  .odb Field: no  .odb History: yes  

Magnitude of translational velocities.

VR

.fil: no  .odb Field: yes  .odb History: yes  

Rotational velocity components.

Vn

.fil: no  .odb Field: no  .odb History: yes  

${\dot{u}}_n$ velocity component ($n=1,2,3$).

VRn

.fil: no  .odb Field: no  .odb History: yes  

${\dot{\varphi }}_n$ rotational velocity component ($n=1,2,3$).

A

.fil: yes  .odb Field: yes  .odb History: yes  

Acceleration components (both translation and rotation).

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

AT

.fil: no  .odb Field: yes  .odb History: yes  

Translational acceleration components.

AMAG

.fil: no  .odb Field: no  .odb History: yes  

Magnitude of translational accelerations.

AR

.fil: no  .odb Field: yes  .odb History: yes  

Rotational acceleration components.

An

.fil: no  .odb Field: no  .odb History: yes  

${\ddot{u}}_n$ acceleration component ($n=1,2,3$).

ARn

.fil: no  .odb Field: no  .odb History: yes  

${\ddot{\varphi }}_1$ rotational acceleration component ($n=1,2,3$).

POR

.fil: yes  .odb Field: yes  .odb History: yes  

Acoustic pressure at a node.

PABS

.fil: yes  .odb Field: yes  .odb History: yes  

Acoustic absolute pressure at a node.

NT

.fil: yes  .odb Field: yes  .odb History: yes  

All temperature values at a node. Available only for coupled thermal-stress analysis.

NTn

.fil: no  .odb Field: no  .odb History: yes  

Temperature degree of freedom n at a node ($n=11$). Available only for coupled thermal-stress analysis.

RF

.fil: yes  .odb Field: yes  .odb History: yes  

Reaction force and moment components.

Results file and field-type output: both translation and rotation.

History-type output: translation only. Rotation results should be requested by components.

RT

.fil: no  .odb Field: yes  .odb History: yes  

Reaction force components.

RFMAG

.fil: no  .odb Field: no  .odb History: yes  

Magnitude of reaction forces.

RM

.fil: no  .odb Field: yes  .odb History: yes  

Reaction moment components.

RFn

.fil: no  .odb Field: no  .odb History: yes  

Reaction force component n ($n=1,2,3$) (conjugate to prescribed displacement $u_n$).

RFL

.fil: yes  .odb Field: yes  .odb History: yes  

All reaction flux values. Available only for coupled thermal-stress analysis.

RFLn

.fil: no  .odb Field: yes  .odb History: yes  

Reaction flux value n at a node ($n=11$). Available only for coupled thermal-stress analysis.

RMn

.fil: no  .odb Field: no  .odb History: yes  

Reaction moment component n ($n=1,2,3$) (conjugate to prescribed rotation ${\varphi }_n$).

CF

.fil: no  .odb Field: yes  .odb History: yes  

All components of point loads and concentrated moments.

CFn

.fil: no  .odb Field: no  .odb History: yes  

Point load component n ($n=1,2,3$).

CMn

.fil: no  .odb Field: no  .odb History: yes  

Point moment component n ($n=1,2,3$).

NVF

.fil: no  .odb Field: yes  .odb History: no  

Nodal volume fraction.

STRAINFREE

.fil: no  .odb Field: yes  .odb History: no  

Strain-free adjustments to initial positions (adjusted position minus unadjusted position). Only written to the output database (.odb) file for the original field output frame at zero time.

TIEDSTATUS

.fil: no  .odb Field: yes  .odb History: no  

Status of the tied slave nodes (the status of a slave node is 2 if the slave node is not tied, 1 if the slave node is tied, and 0 for nodes that do not participate in a tie constraint).

TIEADJUST

.fil: no  .odb Field: yes  .odb History: no  

Position adjustment vector components of the tied slave nodes. Only written to the output database (.odb) file for the original field output frame at zero time.