*VIEW FACTOR OUTPUT

Write radiation view factors to the results file in cavity radiation heat transfer analysis.

This option is used to write cavity radiation element view factor matrices to the results file. This option is available only for heat transfer analysis including cavity radiation.

Related Topics
In Other Guides
Cavity Radiation in Abaqus/Standard
About Output

ProductsAbaqus/Standard

TypeHistory data

LevelStep

Required parameters

CAVITY

Set this parameter equal to the name of the cavity for which this output request is being made.

Optional parameters

FREQUENCY

Set this parameter equal to the output frequency, in increments. The output will always be written at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.

There are no data lines associated with this option.