*ELEMENT MATRIX OUTPUT

Optional parameters

DLOAD

Set DLOAD=YES to write the load vector from distributed loads on the element. The default is DLOAD=NO.

FILE NAME

This parameter can be used only with the parameter OUTPUT FILE=USER DEFINED. It is used to specify the name of the file (without extension) to which the data will be written. The extension .mtx will be added to the file name provided by the user; see Input Syntax Rules for the syntax of such file names. If this parameter is not included when OUTPUT FILE=USER DEFINED is specified, the output will be written to the data file.

FREQUENCY

Set this parameter equal to the output frequency, in increments. The output will always be written at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.

MASS

Set MASS=YES to write the mass matrix. The default is MASS=NO.

OUTPUT FILE

Set OUTPUT FILE=RESULTS FILE (default) for the data to be written to the regular results file in the format specified in Results file.

Set OUTPUT FILE=USER DEFINED for the results to be written to a user-specified file in the format of the USER ELEMENT, LINEAR option (User-defined elements). The name of the file is specified using the FILE NAME parameter.

STIFFNESS

Set STIFFNESS=YES to write the stiffness matrix (or the operator matrix for heat transfer elements). The default is STIFFNESS=NO.