Creating a datum coordinate system at an offset from another coordinate system

You can position a rectangular, cylindrical, or spherical datum coordinate system by selecting a coordinate system and specifying an offset; you can specify the offset by entering a value or selecting a point.

Related Topics
Methods for creating a datum coordinate system
Datum creation techniques
Controlling datum display

Context:

The figure below shows an example of creating a rectangular datum coordinate system at an offset from the default coordinate system.



When Abaqus/CAE prompts you to select a point, you can select the origin of a datum coordinate system. When Abaqus/CAE prompts you to select an edge, you can select one of the axes of a datum coordinate system.

  1. From the main menu bar, select ToolsDatum.

    The Create Datum dialog box appears. The dialog box outlines the types of datum geometry you can create.

    Abaqus/CAE displays prompts in the prompt area to guide you through the procedure.

    Tip: You can also create a datum coordinate system using the tool, located in the module toolbox. For a diagram of the datum tools in the toolbox, see Using the Datum toolset.

  2. From the list of types at the top of the dialog box, choose CSYS.

    The Method list indicates the methods you can use to create a datum coordinate system.

  3. From the Method list, select Offset from CSYS.

    Abaqus/CAE displays the Create Datum CSYS dialog box.

  4. From the dialog box, enter the name of the datum coordinate system.

    To help keep track of your datum coordinate systems, Abaqus/CAE displays its name in the Model Tree. In addition, you can use the Model Tree to rename the datum coordinate system.

  5. From the dialog box, select one of the following datum coordinate systems:

    • Rectangular: The X-, Y-, and Z-axes are aligned with the 1-, 2-, and 3-global axes, respectively.

    • Cylindrical: The R-, θ-, and Z-axes are aligned with the 1-, 2-, and 3-global axes, respectively.

    • Spherical: The R-, θ-, and ϕ-axes are aligned with the 1-, 2-, and 3-global axes, respectively.

  6. From the Create Datum CSYS dialog box, click Continue.

  7. If desired, select Make Independent from the prompt area to create the datum as an independent feature.

  8. From the current viewport, select a datum coordinate system.

  9. From the buttons in the prompt area, select one of the following:

    Enter Value

    In the text field in the prompt area, enter the X-, Y-, and Z-coordinates of the offset from the selected default coordinate system.

    Select Point

    From the part or assembly in the current viewport, select a point to define the offset from the selected default coordinate system.

    The datum coordinate system appears. You cannot move or rotate a datum coordinate system.